Description
jiekewooda. 1 7/8” x 5 ½” x *8” (*7.*3 mm x **9.7
mm x ***9.2 mm)
2. CORE:
a. Must be all OAK
b. Total thickness 1 ½” (*8.1 mm)
c. Solid single piece each edge 1” to 1 1/8”
(*5.4 mm to *8.*8 mm) wide. 1 1/8 (*8.*8 mm) preferred
i. Sound knots (**4 per piece), acceptable on
edge parts
d. Core material can be edge glued and finger
jointed, expect for edge pieces. No finger joint on edge
pieces
3. FACES:
a. Both faces must be one piece solid OAK 3/*6”
(4.*6 mm) thick x 5 ½” (**9.7 mm) wide
b. Sound knots up to 2” (*0.8 mm) acceptable
c. Star checked knots acceptable
d. Open knots (**2 per face) okay preferred
partially filled with Alder sawdust or mulch. Maximum opening
is (*5.4mm), although knot itself can be up to 2” (*0.8 mm)
at maximum measurement
e. Minimal or no putty fill on faces
preferred
f. Other natural defects (mineral streaks, pin
knots) allowed within reason
g. Shake not allowed
h. Foreign material (wood chips, etc) not allowed
between face and core as telegraph through
4. NOTES:
a. Stiles must be straight and flat. Bowed
or twisted material not allowed as these are made into entry
doors
b. Adhesive used throughout must be a Type I
exterior glue
c. All material used must be Kiln Dried with
moisture content not exceeding ***0%
