Description

APPLICATION
This battery discharge indicator is ideal for golf cars, hunting buggies, commercial leaning equipment, mobility aids, electric bicycles, and similar equipment.
FEATURES
Higher integrated circuits for long-life reliability.
A **-bar high light LED displays the state of charge successively, bar by bar.
At *0% depth of discharge, a flashing LED signals an ENERGY RESERVE alert.
At *0%, alternately flashing LEDs provides an EMPTY status warning.
It is compact and easy to install.
Recognizes improperly charged battery.
Key switch activated LED display (state-of-charge is monitored as long as the BDI is connected to battery).
Lens Material: Plastic
Case Material: ABS KJW, Black
RESET METHODS
Open Circuit Reset (OCR).
Upon reconnection of a battery, the BDI will reset to the full status if it measures 2.*9 volts/cell or higher.
Battery Charging Reset (BCR)
During charging, the BDI will light LED bar by bar according to the increased battery capacity, the BDI will reset to the full state when the BDI measures the voltage of per cell up to 2.*5 volts or higher.
OPTIONS
  Pin 3 is the collector of a triode without high drive ability. Pin 3 will output a pulse (Note.1) voltage at *0% discharge of battery. It can be used to signal another component or to allow for the disabling of a specified vehicle function, insuring against abusive deep discharge conditions.
(Note.1: Output Saturation Voltage: **0 mV (Type) at *0 mA; Maximum VCE is *0V; Frequency is 1Hz.)
SPECIFICATIONS
System voltages: *2V, *4V, *6V, *8V, *2V
Operating voltage: **5% of normal voltage ~ *5% of normal voltage
Operating temperature:**0 Celsius degree to **5 Celsius degree
Storage temperature:**0 Celsius degree to **0 Celsius degree
Shock & Vibration: Meets SAE J ***8