Description

TECNICAL DESCRIPTION Semi- automatic Great facility of use and maintenance Safety mechanism of automatic stop Twisting bar included Maximum height of pieces to produce **0 mm Useful capacity of the concrete hopper *0 mm Marks height - 1 **0mm Width - 2 **0 mm Length - 1 **0 mm Measurements Wight - ***0 mm Bottom - ***0mm Weight ***0mm Maximum height of the pieces to produce - **0 mm Minimum height of the pieces to produce - *0mm Weight HCF8 Machine without mould - aprox. - ***0Kgs Each complete mould - from **0 till **0 Kg Electric Equipment Engine for the vibration : 2*2 Cy - ***0 ***** Engine for the hydraulic system: 3 Cv - ***0 ***** Hydraulic Equipment Engine for the vibration : 2*2 Cy - ***0 ***** Hydraulic engine for rotation movement (**0graus) Lubricators Vibrator - GALP Veloce *0 Hydraulics Oil - GALP HIDROLEP *6 Grassers - GALP Bellona 2 SERVICE INSTRUTIONS CEMENT MORTAR FOR PRODUCTION OF BLOCKS Cement mortar manufacture - Normally the dosages are 6 portions of 1 equal portion of cement. The sand portions will be 5 of the coarse sand more 1 of fine sand. The coarse sands or "Pebble" shall have as maximum dimensions 1/3 of the block density or wall-block density according the type of block (heavy or bored block). The fine sands must have some dust for one best connection of the cement mortar. The cement used is the normal of consumption. The mixture must be homogeneous enough. The mixture quality must be semidry, lightly humid. We can prove this quality pressing a little quantity of the cement mortar in the hand. At the same time we must verify if the mixture becomes homogeneous or on the contrary it becomes disintegrated. In the last case we must consider the cement mortars improper, so we must add more fine components.