Description

Cores and dismountable type of filter-drier shells produced in Aike is replaceable. Cores are individually packed in metal cans, It and hermetically packed against grease moisture and dirt. Includes the LX suction line cores series and the DR liquid line block series. The method of mounting the cores or felt elements on the end plate by means of tie rods makes them very easy to install and remove. Detailed instructions are printed on each can. Specifications: TYPE D1 (in) D2 (in) L (in) D*8 1.*5 3.*8 5.*1 H*8 1.*5 3.*8 5.*1 H**0 2.*9 4.*0 6.*0 Electronic-drain valve The electronic-drain valve is made of solid state electronic time-setting and solenoid valve, which can make the compressor condensates water drain automatically. It is widely used in filter drier, oil/water segregator, refrigerant compressed air drying machine, drying machine, air compressor drip-feet, and so ***** time of drain and interval can be adjustable according to different needs. Our products can substitute for congeneric import products, such as JORC、POWERFLOW and so on. ☆ Various pressures can be provided: 1.6 Mpa, 4.0 Mpa, 8.0 Mpa; ☆ Various electric voltages can be provided:AC**0V, **5 V, DC*4V electric; voltage range: ±*0%; ☆ variety connects can be provided: G1/4"、G3/8"、G1/2"internal flare; ☆ Interval:(OFF)0.***5 minutes; ☆ Drain time:(ON)0.***0 second; ☆ Manual test button:TEST; ☆ Protection grade:IP*5; ☆ Insulate grade:H class(*****.:**0 ℃); ☆ It is can susbsitute for the expansive process valve; ☆ Only one type ?applies all applications; ☆ It is can be Installed simply, full-automatically, without maintenance; ☆ Sieve of ball valve can be mached.