3-Phase Enclosed Distribution Transformer

Description

General introduction: S**-M.R *-phase enclosed distribution transformer with wound-core is applicable for *0kV, 6kV transmission and distribution systems for distribution, power supply and lighting in industrial, agricultural, mineral and petrochemical fields. Compared with series S9, *0% of no-load loss and *0% of no-load current can be decreased averagely. It is remarkable in saving energy. In addition, its noise level is in conformity with national environmental protection policy. Therefore, it is regarded as a wonderful product both in energy saving and environmental protection. Normal service condition: 1) Elevation height: less than 1,**0m 2) Environmental temperature: a) Max. Temperature: **0oC b) Max. Daily average temperature: **0oC c) Max. Annual average temperature: **0oC d) Min. temperature: **0oC 3) Operation environment: outdoor 4) Symmetry of multi-phase power source Features: 1) Core is wound by silicon strip with lower loss 2) Enclosed structure is also called as R-shaped core 3) Core limb and yoke cross-section is close to a circle 4) Impact, lower no-load loss and smaller current 5) Due to fully enclosed transformer, isolation between oil and air keeps insulation away from moisture, which lowers insulation aging and improves service life 6) The product is free from un-tanking before operation and is free of maintenance During operation 7) Owing to the corrugated plate used for cooling for S**-M.R. series, oil volume is Changed by adjustment and compensation through expansion and shrinkage of Corrugated plate when the temperature of oil is changed The product listed is just a reference, we also provide other types of oil immersed and dry transformers. If you are interested in our products, please do not hesitate to contact us.