Description

The Aluminum Tilt Offset Umbrella offers great-looking shade with an appealing and strong hexagonal frame. A fantastic-looking canopy has valances to give you an extra angle of sun blockage in addition to stylish looks. The umbrella also conveniently rotates **0 degrees to shade you from the sun at any point during the day. Offset construction lets you use this umbrella in a variety of ways. The sturdy frame is crafted from aluminum and is finished with an attractive powder-coating. This coating results in a consistent, long-lasting finish that is resistant to chipping and scratching. A crank lift opens the canopy and it will move to any angle you need via a manual tilt system. Broad selection of fade-resistant Sunbrella fabrics. Choose the type of base you prefer to meet your installation needs perfectly. Choice of Free Standing, Spa, Deck Mount, or Ground Insert Bases. The Ground Insert Base goes *1 inches into the ground, has a *-inch tube, and will show only a flat 5 x *-inch disk when not in use. Installing this base requires a small hand shovel, ready-mix concrete, *-gallon mixing bucket, an **- to **-inch piece of 2 x 6, two *-inch clamps, and a carpenter&#**9;s level. Deck Mount Plates will work on wooden decks as well as concrete patios. Both will be 3/4 inches high and 9 inches in diameter. Installing on wood will require a drill with a 1/4 inch drill bit, lag screws, washers and a ratchet with half-inch socket. Installing on concrete will require a hammer drill with a 1/2 inch concrete bit, 4 concrete spread anchors, 4 mounting bolts with washers, and a ratchet with 1/2 inch socket. Order the Aluminum Tilt Umbrella with Valance for great looks and durability that will get noticed. Included: Umbrella Cnopy, Powder Coated Aluminum Frame, Choice of Base Not Included: Concrete Blocks forFree Standing Base