Sell SBL Pipe Taper Thread: connection thread system is 55o

Description

Target mode flow meter utilizes the modern sensor and computer technology. It not only involves characteristics of Target Flow meter, Hole Board Flow meter and Turbine Flow meter, but also measure accuracy comparable to Cubage Flow meter. Since its anti-interfere, anti-impurity, portability and reliability, it is widely used in fields of petroleum, chemical industry, energy, foodstuff, environment protection, water conservancy , gas etc. The flow meters are applicable to the following ranges: l Diameter , Φ*5Φ***0mm or bigger. l High and low temperature, ***6***0. l High pressure : **2Mpa. Characteristics l Measurement flow of liquid, gas, steam, ropy mediums or ambulatory mediums in low, normal or high temperature condition. l Total quantity measurement accuracy is not less than 0.2%. l High sensitivity, able to measure very low velocity below 0.8m/s. l No movable part, safe and reliable. l Wide measure range, bigger than 1:*0. l Good repeatability, generally 0.*0.*8% , fast to measure. l Small pressure loss, only about 1/2P of Standard Hole Board. l Able to adopt hang weight method to test the flow meter. l Measurement range can be changed by replacing target according to need. l LCD display. l ***0mA, ***0V, impulse, and RS**5 outputs. Easy installation and maintain. Size Nominal inside diameter A B mm in *5 1/2 **0 **0 *0 3/4 **0 **0 *5 1 **0 **0 *2 *1/2 **5 **0 *0 *3/4 **5 **5 *0 2 **5 **5 *5 **0 **5 *0 3 **0 **0 Notes: a. Connection thread system can be made to user order; b. For dimensions A and B of high temperature type and temperature/pressure compensation type, ex-factory status (or order confirmation) shall govern; c. For dimensions A and B of special order size, actual dimensions of instrument shall govern; d. When media temperature of high temperature type flowmeter is >**0, the instrument must be installed up-side-down and horizontal. The design shall consider sufficient mounting space; f. When the media flow up-down or down-up, for the purpose of ordering, please note: right view, left view (showing gauge head).