Sell Glassfiber Rebeaming Machine

Description

Load 4 beams from warping machine on beam frame, a motor on frame drive the 4 beams to wind yarns into one loom beam at even speed with proper tension. Technical Features: 1. Automatic control by MISTUBISHI PLC 2. Closed loop yarn winding and unwinding control by inverter motor, electric-pneumatic proportioning valve and liner displacement transducer 3. Measuring roller is connected with liner displacement transducer 4. 6 inches touch screen for data setting and display 5. Upper and lower press roller connect with two pneumatic cylinder for tightening yarn, increase winding angle of draw-off roller to avoid yarn sliding on roller 6. Both of draw-off motor and unwinding motor are equipped with brakes, beam in running condition can be stopped quickly whenever required so. 7. A rotary encoder is designed on guide roller to measure warp length. 8. Unwinding is controlled by inverter motor via a gearbox 9. Beam loading and doffing is controlled by supporting arm pneumatically *0. Guard rail and infrared device for guaranteeing operator&#**9;s safety Technical parameters 1. Loom beam dia. **0mm - ***6mm 2. Warp beam dia. **0mm - ***6mm 3. Width of loom beam **0mm - ***0mm 4. Width of warp beam ***8mm or to order 5. Beaming speed 5 - **0m/min 6. Warp beam No. 4 or to order 7. Unwinding tension *0 - **0N 8. Winding tension **0 - ***0N