Description

Features
Digital fusion splicer with automatic focus function
Fiber core can be display clearly by **0 times microscope
Single X or Y view and X & Y view simultaneously
Auto detect cleaved end face fault
Display fiber cleaved and offset angle
Display core and clad offset
5.6 inch TFT color LCD monitor with clear digital image display 
USB & VGA interface
Software upgrade via USB interface
 
Technical Data
Applicable fibers
SM (ITU-T G.**2), MM (ITU-T G.**1), DS (ITU-T G.**3), NZDS (ITU-T G.**5)
Fiber cleaved length
*0 ~*6mm (Coating diameter<**0µm);*6mm(Coating diameter**0~***0µm)
Fiber diameter
Cladding diameter:*0 ~**0µm , Coating diameter:**0 ~***0µm
Auto focusing
Available
Fiber aligning method
Core aligning, clad aligning, manual aligning
Average splice loss
0.*2dB (SM), 0.*1dB (MM), 0.*4dB (DS), 0.*4dB( NZDS)
Splicing time
Typical 9 sec,with standard SM fiber
Heating time
Typical *6 sec
Applicable sleeves
*0mm, *0mm and a series of micro sleeves
Tension test
2N(option)
Electrode life
***0
Battery capacity
Typical **0 cycles (splice and heat)
Monitor
5.1 inch TFT color monitor
Terminal
USB 1.1 and VGA ,   software upgrade via USB interface
Operating condition
0 ~ ***0m above sea level, 0 ~ *5%RH and **0~*0oCC, respectively, Max. wind velocity of *5m/s
Splicing mode
Auto ,normal
Fiber cleaved angle threshold set
0.1 ~ *0.0 oC , 0.1oCstep
Power supply
Li-battery *1.8V  , AC******0V  DC*2.6V/5.0A
Dimension
L**9*W**2*H**5mm
weight
2.4kg   2.9kg(battery)
 
 
Applications
FTTX