Description

Features Specifications: PET sheet extrusion - Without predrying New but sucessful technology for PET direct extrusion without crystallization USEON&#**9;s unceasing efforts to design the best extruders to adapt the PET extrusion make us advanced in sheet extrusion technology and equipments. Combined with simplification of the flow chart, our PET sheet extrusion avoid the predrying units and crystallization units. This not only simplifies the systems and also reduces energy involved for predrying system. USEON&#**9;s twin screw extruders to plasticating without predrying Counter rotating twin screw extruder is different from normal one. It features high speed, higher capacity, and more applications. can extrude sheet, board, film directly without pre-dry. It has significant advantage in energy-saving. Addtionally, more advantages are even more interested as per below. Single screw extruder with dryer TDY twin screw extruder with degassing unit Adaptability for APET, PET-g, CPET + + + + Limitation of moisture of chips + + + + IV drop for initial 0.8 0.*3 0.*2 Typical energy consupmition ≈0.5kwh/kg ≈0.3kwh/kg Easy to change source material + + + Invest on equipments + + + Space requirement + + + Possiblity to process flakes + + + + Dramatic energy-saving When we talk about the difference between the traditional solution with crystallization systems and the direct extrusion solution with twin screw extruders, the energy saving could be easily calculated. The typical power for predrying unit and crystallization is about 0.2kwh/kg, however the degassing units for twin screw extruders just consumes about 0.**8kwh/kg. The total energy comsupmtion differene could be up to more than *0%. Advanced Sheet/Film Technology With particular technology and engineering experience, USEON develops and perfects the sheet/film extrusion line. The main advantages are the compounding and pelletizing technology of twin screw extruder. Integrated with advanced control system, its post stretch and calibration also have excellent performance. USEON did better more than what you have expected. **0% clean flakes to form PET sheet! With our above mentioned technology for PET sheet extrusion process, **0% flakes for final sheet production are now possible to be done. USEON&#**9;s twin screw extruders are applied sucessfully in our latest delivered machines.