Sell Plated and Tube Condenser

Description

Specifications: 1) Raw material: a) Rolling welded steel tube: 4.*6 ~ 6.*5 x 0.*1 b) Bracket: steel plate SPCC thickness 0.6 ~ 2.0 c) Base mounting plate: SPCC thickness 0.6 ~ 0.8 2) Technical standards: can produce according to clients&#**9; drawing or samples 3) Performance: a) Surface with electrophoresis coating to prevent the corrosion b) Inner cleanness can meet the requirement of R**4a and CFC cooling system c) Can satisfy the cooling capability requirements Structure: Steel tube welded with the steel plate R**4a cooling system tube inside standard: 1) Residual moisture: ≤*0mg/m² 2) Residual dusty: ≤*0mg/m² 3) Residual mineral oil: ≤7mg/m² 4) Residual chlorine: ≤3mg/m² 5) Sealing density: ≥1.*5MPa Specification of E-coating: 1) Coating thickness: a) Thickness of anodic electrophoresis coating ≥*2Î&frac*4;m b) Thickness of cathodic electrophoresis coating ≥*0Î&frac*4;m 2) Hardness of coating ≥2H 3) Impact of coating: *0cm.kg/cm impact, no crack 4) Adhesion of coating: ≥2 grade 5) Flexibility of coating: around R=3D bend **0 degrees, no crack or no fall off 6) Corrosion resistant (salt spray GB***3) a) Anodic electrophoresis coating ≥*4h b) Cathodic electrophoresis coating ≥*6h