100A Electronic Speed Controller for RC Boats (DLB100A)

Description

PULSO ESC (electronic speed controller) for RC Boat(*0A, *0A, *0A, **0A). For Boat Model (DLB series) I. Features: 1. Easy setting; easy operation with waterproof function. 2. It can be connected to USB port of PC by USB cable; it is convenient to set all parameters of ESC. 3. Safe start-up system: The motor wont be started no matter which position the throttle stick is on when the battery is connected. 4. Automatic power cut-off: As the motor stops rotating or the radio signal loses for more than 3 seconds, the power will automatically be cut off. 5. Over-heat protection: The power will be cut-off as it is heated up to **0. 6. No BEC: The receiver needs another electric power supply. (A 5V/3A UBEC can apply the power.) 7. Three frequencies selectable: 8kHz / *6kHz / *2kHz for different series motors. 8. Low-voltage cut-off: By PC via USB cable, the LiIo/LiPo battery single cells cut-off voltage can be set during 2.0V*3.2V (Step: 0.1V); By PC via USB cable, the Ni-MH/Ni-CD battery single cells cut-off voltage can be set during 0.4V*1.0V (Step: 0.1V). 9. Forward / Reverse function. *0. Timing mode: Timing mode 1: **5 degree/ Timing mode 2: ***0 degree/ Timing mode 3: ****8 / Timing mode 4: *0 degree By PC via USB cable, timing mode can be set from ***0 degree(Step: 1 degree) II. Factory Default Setting: 1. Forward / Reverse on mode 2. Timing mode 1 (**5 degree) 3. Cut-off voltage: 5.5V for two cells LiIo/LiPo battery. 4. Frequency 1 (8 kHz).