Sell pressure handpump

Description

Introduction: The CST***3 Pneumatic pump is a hand operated pressure generate that provides a quick and cost effective means of comparing reading between, for example, a test gauge and a standard pressure gauge or pressure switch. Three(3) pressure ports are provided. Connect a reference grade gauge on one port and the gauge to be tested on the second port. Operate the pressure lever till the desired pressure is generated. Then, compare the displayed pressure values between the reference gauge and the gauges under tested. The CST***3 is much practical than any hand pumps. This is because the shut-off valve of CST***3 makes the seal performance best, and also it could use single hand to pressurizing. The features and performance for even you most demanding gauge calibration requirements. Specification: Pressure Vacuum Pressure: *0.*5~0 BAR Positive Pressure: 0 to *0 BAR Pressure resolution: 0.1 MBAR Material: Ram/Adapters: **6SS Body: Steel Seals: Buna N (nitrile) Media: Air Dimensions: Length (of base): **5mm (*4.*6&#**9;&#**9;) Width (of base): **5mm (*2.*0&#**9;&#**9;) Height (overall): **0mm (5.*2&#**9;&#**9;) Weight: 9.9kg (*1.*3lbs)