Description
ST-G**-SFP
*0/**0/***0M SFP Fiber Media Converter
Gigabit SFP Media Converter can convert Optical-Electric Ethernet
signals between *0/**0/***0M UTP interface (TX) and ***0M optical
fiber interface (FX). The traditional *0/**0/***0M gigabit Ethernet
can be extended to the distance of *0km through single optical
fiber link.
Â
Features:
1. Fully Complies with IEEE**2.3 *0Base-T,IEEE**2.3u **0Base-TX,
IEEE**2.3ab ***0Base-TX , IEEE**2.3z ***0Base-FX standard
2. One *0/**0/***0M Auto-Negotiation RJ*5 port, support Auto
MDI/MDIX
3. One ***0Base-SX/LX SFP Port( with SFP module)
4. Auto-detection of half/full duplex transfer mode for Tx port
5. Auto-negotiation of *0/**0/***0Mbps rate and Auto-MDI/MDIX for
Tx port
6. Provide switch configuration of half/full duplex transfer mode
for Fx port
7. Extend fiber distance up to **0/**0m for multi-mode fiber and
*****0km for single-mode  fiber
8. Indication light: PWR, FX Link/act, FX ***0M, TX ***0M, TX
*0/**0M, TX Link/act.
Â
Technical Standard:
1. Standard:
IEEE**2.3 *0BASE-T Ethernet
IEEE**2.3u **0BASE-TX/FX Fast-Ethernet
IEEE**2.3z/ab ***0BASE-FX/TX ***0M-Ethernet
IEEE**2.3x
2. RJ**5 Port: Auto-MDI/MDIX
3. Network Cable: Twisted pair Cat.5 UTP Cable: **0m
4. Fiber Cable:
MMF £º *0/**5,*2.5/**5,**0/**0¦Ìm (maximum 2Km)
SMF £º 8.3/**5,8.7/**5,9/**5,*0/**5¦Ìm (*0~*0Km)
5. Dimensions(WxDxH): *6x*0x*5mm (External power)
6. Input Voltage: DC5V1A ( External power input :
AC**0V-AC**0V/****0HZ )
7. Operational Temperature: 0 ~ **0C
8. Store Temperature: **0 ~ **0C
9. Humidity: 5%~*0% no coagulation