Hydraulic Pressure Pump (0~2500bar)

Description

The CST***5 Hydraulic pump is a hand operated pressure generator that provides a quick and cost effective means of comparing reading between, for example, a test gauge and a standard pressure gauge or pressure switch. It is made up of a hydraulic pump, adjuster of screw compressor, valves and pipes. Three (3) pressure ports are provided. Connect a reference grade gauge on one port and the gauge to be tested on the second or third port. Operate the pressure lever and rotate wheel handle clockwise until the desired pressure is generated. Then, compare the displayed pressure values between the reference gauge and the gauges under tested. The CST***4 is much, much faster to use than a deadweight tester, and its&#**9; also faster than most auto-mated pressure controllers, but it costs much less than either. It&#**9;s so quick and easy to use, it&#**9;s ideal to calibrate those low cost gauges that are often overlooked for ISO***0 compliance. The features and performance for even you most demanding gauge calibration requirements. Specifications: Pressure ranges A. (**0~****0psi) *0~***0 BAR B. (**0~****0psi) *0~***0 BAR C. (**0~****0psi) *0~***0 BAR D. (**0~****0psi) *0~***0 BAR Material: Ram/Adapters: **6SS Body: Steel Seals: Buna N (nitrile) Media: Hydraulic oil (Keep same oil) Dimensions: Length (of base): **0mm (*5.*5&#**9;&#**9;) Width (of base): **0mm (*1.*1&#**9;&#**9;) Height (overall): **0mm (4.*2&#**9;&#**9;) Weight: 9.5kg (*0.*4 lbs) Accessories (included): Head Plug: 3 pieces O-ring: 8 pieces