Description
~Weighing Scale
Description :
ICS(TDG,DEL)frequency governing dosing feeding weighing scale is
the dynamic weighing Equipment manufactured by our company, and all
kinds of lump or granular materials(like limestone, iron
powder,clay,etc)and powdery materials (like fly ash,cement,etc)can
be transported
Continuously, measured dynamically and controlled to be fed by our
company.
This product is suitable to be used in the following two control
systems which are also developed by our company
1. Frequency governing dosing continuous feeding system (With
PL**1A weighting indicator and Frequency governor);
2. Computer centralized control dosing continuous feeding system
(With PL**1A computer centralized control system and multichannel
amplifier, so one set of the system can control *6 channels or
above, and that is to say it can control two mill at the same
time.)
Constructions features
(1)Integration and direct connection deceleration motor, with low
noises, small vibration, dust resistant, long life and high
reliability;
(2)The annular belt without joint can transport the materials
smoothly and without leakage;
(3)The flange at the end face for reducer is connected with the
driving roller of the weighing Scale directly, and it can simplify
the design of the transmission part to make the installation very
convenient;
(4)Particular design of spring leaf weighing mechanism and low
electromagnetism gear speed detector, the weighing signals and the
tachometer signals are accurate and stable;
(5)Particular anti-meandering equipment for the belt;
(6)The weighing scale is installed under the raw materials silo,
and requires no electrical vibrating feeder or any other
intermediate feeding facilities.
Main technical parameters
Dynamic accumulated error: Above 1.0%;
Weighing signals linearity: Above 0.2%;
Achometer signal:*0 pulse/r;
Atching AC asynchronous motor: 0.*5KW, 1.5KW(quadrupole);
The length of the weighing section: 1m, The length of the buffer
section: 0.7m, the center distance
between the driving roller and the driven roller is 1.7m;
The height from the belt surface to the foot installing surface:
Three are two types (0.*5m, 0.5m);
Elt width: There are four types(**0mm,**0mm,**0mm,***0mm);
achine-hour transport capacity:0.5t/h~**0t/h.
