Description

The machine can make 1. Can weave taffeta, mesh,crinkle, strengthen and cut-out fabric. 2. 8 feeders can knit 2 color plating stitch jacquard. 3. 8 feeders can knit bossy jacquard stitch. 4. It can knit underwear, outer wear, playsuit,sportwear and health care garment etc. 5. It is suitable for many raw material just like cotton,mixed yarn,nylon,polyester, acrylic and wool. 6. use dialjack can knit different single or double welts. After it drops automatically, it becomes a separate piece with the takedown device 1. Technic Parameter Machine monitor:*0.4〞 color screen (**0×**0) with language of Chinese and English. Diameters:From *2〞to *7〞 Gauges:From *6G to *2G Feeds:8 feeds for any diameter Selector:*6 Density adjust:8 Motor:2.5KM Machine speed:*3〞max speed **0 RPM(depending on diameters, materials and knitting structures) Weight:Appro×**0KG xxxxx Programming:By Cixing graphic system, the program can be modified directly on machine screen board. Controller:Controlled by servo motor, which connected with BTSR&#**9;s smart*4 yarn feeds, to prepare the CAN connector in advance, to imput of alarm for *6 keys. Selection actuator:2 WAC/Japan actuators per feed, each with *6 levels, to have the 3 ways technicl working at 8 feeds Yarn finger:Each feed has 7 yarn fingers (including 2colors yarn finger at 2 positions) Biders for bare covered elastic yarn:8 feeds, each feed has 2 yarn binders Yarn gripper and cutter:The dial rise or fall control by stepping motor and cutter&#**9;s height adjustable Take down:Suction with 2 fans or centralized system, the machine comes with a revolving tube to prevent twisting Sitich cam:By means of independent stepping motors per each feed, allowing quick lossing or tightening on the same course Yarn sensor:1 optical serial sensor per yarn finger, each feed has 8 optical sensors Creel stand:The creel stand behind of machine, set up yeans by pneumatic * *(@********************