Description

Features: 1) 5 kinds of colors available: blue, green, and red, white, yellow. 2) 7 kinds of colors of chromatic circle available: blue, green, orange, purple, red, white, yellow 3) Two kinds of lampshades: plane edge and chambered surface Attentions for operation: 1) Change push button and push button with lamp: In the state of locking, mustn&#**9;t disassemble the alternation type push button; otherwise, the inner structure would be damaged 2) Operate selector switch and key switch: just slightly rotate the selector switch and key switch, they can run. Mustn&#**9;t use extra power to operate 3) Protective cover, waterproof cover, protective ring: when installing JHF*6 push button, please pay attention that the thickness of installation panel can&#**9;t exceed the 2.6mm of protective cover, 2.0mm of waterproof cover and 2mm of ] protective ring 4) Connection methods of wire: using adjacent terminals, please assemble an anti-short circuit insulation bushing to make sure insulation. Especially pay attention to the situation that the welding terminal is connected with thick wire or the welding spot is very large 5) Installation methods of panel: the installation sequence as follows: make the operation part pass through the panel hole, tighten the nut and fix, then butt the lock catch of switch rack with the connection rack of operation part, then press them into one ingeneration. If need to disassemble the switch rack, just align the lock catch toward the inner side 6) Operation: the push button would be damaged if the tool is used to knock it, so please operate it by hand 7) Storage and using environment: use it within the specified working environment temperature and humidity. The enclosed type product shall not be used in the locations where there are oil, water and many dusts. The anti-oil switch or the product with waterproof cover or protective cover can be used in th