Description

This machine is flowing and continuous type drying equipment firstly made by our factory. The machine is used for drying the piece, tape and particle state materials with good ventilation. The machine is suitable for the materials, such as de-watering vegetable, herbal medicine of traditional Chinese medicine and others, for which the water content rate is high and the high temperature is not allowed. The machine owns the advantages, that its drying speed is fast, the evaporation strength is high and the product quality is good. The de-watering filtering cake state paste material, after the particle making or bar making, can be dried also. Principle of Work : The materials are uniformly put on the mesh-belt by the material charger. The mesh-belt uses generally ****0 mesh stainless steel wire net and it is drawn and moved inside the direr by a transmission device. The drier is composed of several units, the hot air is circulated separately. Some exhausted gas is discharged with a special moisture elimination blower. The waste gas is controlled through an adjustment valve. The hot air passes through the mesh-belt covered with the material from the top to the bottom or from the bottom to the top and this will complete the heat and mass transfer process. This process will bring will fall into the material collector continuously. The top and low circulation units can be freely equipped according to the users&#**9; demand. The unit number can be selected according to be demand. Scope of Application: De-watering vegetable, particle feed, gourmet powder, shredded coconut stuffing, organic color, compound rubber, acryl fibre, medicine product, medicine material, small wooden product. plastic product, aging and solidification for the electronic component and device. Main Technical Specifications: type W*1.*8 DW*1.***0 DW*1.**8 DW*1.***0 DW***8 DW****0 unit number 4 5 4 5 4 5 belt width m 1.2 1.2 1.6 1.6 2 2 drying section length m 8 *0 8 *0 8 *0 thickness of the material to be covered mm ****0 temperature &#***1; *****0 steam pressure Mpa 0.**0.8 steam consumption Kg/h ******0 ******5 ******5 ******0 ******0 ******0 drying time h 0.**1.2 0.***1.5 0.**1.2 0.***1.5 0.**1.2 0.**1.5 drying strength Kg H2O/h *****0 *****0 *****0 *****0 ******0 ******0 total power of the blower Kw 9.9 *2.1 9.9 *2.1 *8.2 *2.2 total power of the equipment *1.4 *3.6 *1.4 *3.6 *9.7 *3.7 DWP series Mesh-Belt Drier Principle of Work: For DWP type spray air mesh-belt drying machine, the hot air flows, through narrow seams or holes, downward or upward to the materials on the transmission belt. Because the spray air speed is up to more than *5m/s,the heat transmitting film is very thin, the heat transmitting co-deficiency is big and the drying speed is fast. When the machine is used for the air tight grains, the air flows will pass through the inside of the materials. The heat source can be steam, electric, thermal furnaces and combustion oil air and etc. Scope of Application: DWP type spray air mesh-belt drying machine is mainly used for drying the fibre plate, plaster plate, pulp film, coated cloth and etc. The machine is also suitable for drying the sheet state material and some special materials. Main Technical Specifications: Type DW*1.**8 DW*1.***0 DW*1.**8 DW*1.***0 DW***8 DW****0 Unit number 4 5 4 5 4 5 Drying section length m 8 *0 8 *0 8 *0 Thickness of the material to be falted mm ****0 Temperature &#***1; *****0 steam pressure Mpa 0.**0.8 steam consumption capacity Kg/h ******0 ******5 ******0 ******0 ******0 ******0 Drying strength Kg H2O/h *****0 *****0 *****0 *****0 ******0