Will Test Equipment Trading Company

Jointed Test Finger 2 Insulated portion Ø20mm, 95mm long this jointed finger Meet the requrei

IPX1, IPX2, IEC60529, GB4208, vertical drop test box. IPX1 uses the vertical drop of water tank, shell in t

The test is made using one of the two test device described in figure 4 and in figure 5 in accordance with the

Meet the requirements of IEC60695-2-10 ~ IEC60695-2-13 (GB/T5169.10-2006~GB/T5169.13-2006) and UL 746A \ IEC82

Position: Home > Product > Test fingers & ProbesTest fingers & Probes IEC61032_Test_Bar Test

test sphere, Ø50mm with or without handle or Ø12.5mm Conforms to IEC60065, IEC60529, IEC609

Suitable for thick and high voltage electric wire electric cable spark testing, line to center high 1 m plus o

Test Set consists of a jet handle that is equipped with a pressure gauge and an easy-to-adjust flow valve. Th

Test Set consists of a jet handle that is equipped with a pressure gauge and an easy-to-adjust flow valve. Th

High Frequency spark tester is a efficient and reliable product inspection tool, a precision instrument to de

"NOT GO" GAUGE FOR E26, E26/50x39, E26/51x39 & E26d CAPS ON FINISHED LAMPS (Sh. 7006-29L-4) &qu

according to the IEC60068-2-75, GB/T2423.55-2006, GB4706.1, GB8898 and GB7000, IEC884 and UL1244, etc. made of

Standard CNS: 3627, 3385, 4159, 7669, 8886; JIS: D0201, H8502, H8610, K5400, Z2371; ISO: 3768, 3769, 3770;

Ball pressure apparatus 1, the ball diameter: 5mm (R2.5mm) 2, the total test pressure: 20N ±

"NOT GO" GAUGE FOR E27 CAPS ON FINISHED LAMPS (7006-28A-1) "GO" GAUGE FOR E27 CAPS ON FIN

IEC 60529 Test rod 2.5mm, IP3X Ø2.5mm, 100mm long Conforms to IEC60065, IEC60529, IEC61032 This

"NOT GO" GAUGE FOR B22 CAPS ON FINISHED LAMPS (7006-10-8) more related gauges for B22d see below, a

"GO" AND "NOT GO" GAUGE FOR BASES GU10, 7006-121-1 "GO" AND "NOT GO"

IEC60529 Test Wire 1.0mm, IP4X �1mm, 100mm long Conforms to IEC60065, IEC6

Gauges for E27 caps on finished lamps accord to IEC6061-3 "GO" Gauge "GO" Gauge For Di