Tire retreading machine for truck

Descripción del producto

Cold Tyre retreading line including *0 machines

• 1. Curing chamber
• 2. Tire buffing machine
• 3. Tire building machine
• 4. Envelope spreader
• 5. Rims remover
• 6. mixing machine
• 7. Extruding machine
• 8.Dust-collector
• 9. Tire conveyor
• *0.Inspection machine

  Tyre Retreading Process

  1.Inspection Choose the better tyre .The surface of the tyre must be intact , both the sides should not have oversizebreakage 

   

  2. Drying Clean the tyre ,then dry it .

   

  3.Buffing After drying,the tyre's original tread is mechanically removed on high speed buffers.Then people make second polishing and section repairs.

   

  4.Building-tread rubber The buffed tyre needs a thin layer of cushion gum to be wrapped around its crown area. The pre-cured tread rubber is then applied with the Tire Surface Press Fit Machine

   

  5. Enveloping The built tyre is then mounted with envelop and rim to prepare them for curing .

   

  6.Fixing steel ring After enveloping the tire, fix them on the felly on the working platform. And they are ready for being made vacuum and vulcanization.

   

  7. Curing WITH Curing Chamber The tyre is then placed in a pre-cure pot and pre-cured tread becomes adhered to the tyre through a curing process.

   

  8. Final inspection The retreaded tyre is subjected to a final inspection. This inspection insure that only tyres that meet industry qulity standards are allowed to leave the retread plant.