RTV Adhesive

PRODUCT DESCRIPTION SBOND **8TM RTV Silicone Gasket Maker provides the following product characteristics:

SBOND **8TM RTV Silicone Gasket Maker is a fast cure RTV Gasket Maker.It remains

pliable and flexible and isdesigned to seal flanges, threaded connections and fasteners at temperaturesfrom**5 °C to ***5 °C. It can be effectively applied to cork, paper, plastic and metal surfaces.
Typical applications

sealing gaskets;

flanges and threaded connections;

aircraft heating systems;

manifolds;

pipefittings;

steam lines;

gear boxes and cover plates.

Directions for use
1. Clean and dry all surfaces.
2. Apply SBOND ***2™ onto both surfaces and spread with spatula or putty knife.
3. Assemble parts immediately while still wet. Secure or tighten to recommended torque specifications.
4. Allow 3 to 5 hours before using equipment.
5. Re-torque will not be necessary after the product has cured.

Storage
Store product in the unopened container in a dry location.
Storage information may be indicated on the product container labeling.
Optimal Storage: 8 °C to *1 °C. Storage below 8 °C or greater than *8 °C can adversely affect product properties. Material removed from containers may be contaminated during
use. Do not return product to the original container. HANGZHOU FENGLEI INDUSTRIAL CO.,LTD cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated. If additional information is required,
please contact your local Technical Service Center orCustomer Service Representative.