Descripción del producto
CELdek®
****- *5 / Rder& ****- *5 evaporative cooling
padis used
in systems where high efficiency cooling is required. It can be
used for many different cooling purposes but is particularly
suitable for cooling of live stock buildings and greenhouses when
higher air velocity is required.
The Green stripe pad consists of
specially impregnated and corrugated cellulose paper sheets with
different flute angles, one steep (*5 deg) and one flat (*5 deg)
that have been bonded together. This unique design yields a
cooling pad with a high evaporation efficiency while still
operating with a very low pressure drop. In addition scaling is
kept to a minimum and no water carry-over occurs due to the fact
that the water is directed to the air inlet side of the pad. This
is where most of the evaporation takes
place.
The impregnation procedure- for the
cellulose paper ensures a strong self supporting product, with
high absorbance, which is protected against decomposition and
rotting and therefore increascing
longevity.
The distribution pad constitutes a vital
part of a complete system and should always be ordered in
combination with Rder& evaporative cooling pads. Placed on
top of the cooling pad it ensures a uniform supply of the water
to the cooling pad and minimises the risk of dry
spots.
The evaporative cooling
technology
Water is circulated through a pump
station and supplied to the top of the cooling pad via a
distribution manifold. A distribution pad on the top of the
cooling pad ensures an even water distribution. The water flows
down the corrugated surface of the Rder& evaporative cooling
pad.
Part of the water is evaporated by the
warm and dry air that passes through the pad. The rest of the
water assists in washing the pad, and is drained back to the pump
station through a gutter system.
The heat that is needed for the
evaporation is taken from the air itself. The air that leaves the
pad is therefore cooled and humidified simultaneously without any
external energy supply for the evaporation process. This is
natures own cooling process.
Equipment
High evaporation
efficiency
Superb wetting
properties
Low pressure drop when wet, leading to
lower operating costs
No water
carry-over
Low scaling
Self cleaning
Strong and self
supporting
Long life time
Low running costs
Quick and easy to
install
Environmentally
friendly
Consistant high
quality
Performance curves: The pressure drop
diagram shows the pressure-drop over the pad in the wet
condition. With the pad in a dry condition the pressure-drop is
<*0% less. There for there is minimal loss of air-flow when
the pad is wet compared to when it is dry.
Order Information Evaporative Cooling
Pads
Rder& ***0 - *5 - Height,mm - Width,
mm - Depth, mm (e.g., Rder&
*******************0)
Standard Heights: H = ***0,***0,***0 and
***0 mm
Standard Width : W = **0
mm
Standard Depths: D = **0,**0, **0 and
**0 mm
Order Information Water Distribution
Pads
Rder& ****0 - 0 - Width, mm - Depth,
mm - Thickness,mm ( Rder®
*****************0)
Standard Width : W = **0
mm
Standard Depths: D = **0,**0, **0 and
**0 mm
Standard thickness: C = *0 and *0
mm
Rder& is developed by Rdercorp and
marketed worldwide.
| País: |
China |
| N º de Modelo: |
5090/7090
|
| Precio FOB: |
110 / Bag (Negociable)
Obtener el precio más reciente
|
| Lugar de origen: |
SHANDONG |
| Precio de pedido mínimo: |
110 per Bag |
| Cantidad de pedido mínimo: |
1800 Cubic Foot |
| Detalle de embalaje: |
SHANDONG |
| El tiempo de entrega: |
7 day |
| Capacidad de suministro: |
1000 Bag per Week |
| Tipo de pago: |
T/T |
| Grupo de productos : |
Evaporative Cooling pad
|
