Protek A333 Network Analyzer

Descripción del producto

Measurement range
 
- Frequency Range: 0.3 to ***0MHz
- Impedance: *0Ω (*5Ω)
- Test Port Connectors: N-type Female
- Number of Test Ports: 2
- Frequency Accuracy: ±5 ppm
- Frequency Resolution: 1 MHz
- Number of Test Points User-Selectable: 2 to ****1
- IF bandwidth settings 1/1.5/2/3/5/7/*0 step: 1Hz to *0 kHz
- Dynamic Range IF Bandwidth *0Hz: 2 to ***0MHz > **5dBTyp. **0dB
 
Test port output
 
- Power range: **5 to **0dBm
- Power accuracy : <1.0dB
- Power resolution: 0.*5dB
- Harmonic distortion: **0dBc
 
Test port
 
- Match Without system error correction: > *5dB
- Damage level: **6dBm
- Damage DC voltage: *5V
 
External Reference Signal Input/Output
 
- Frequency: *0MHz
 
Measurement Accuracy
 
1. Accuracy of Transmission Measurement (magnitude/phase)
 
- Specifications are based on a matched DUT, a measurement bandwidth of 1 Hz,
and a nominal source power of *5dBm **5 to *5dB 0.2dB/2.0°
 
*5 to **0dB 0.1dB/1.0° , **0 to **0dB 0.2dB/2.0° , **0 to **0dB 1.0dB/6.0°
 
2. Accuracy of Reflection Measurement (magnitude/phase)
 
- Specifications are based on a matched DUT, a measurement bandwidth of 1 Hz, and a nominal source power of *5dBm
 
0 to **5dB 0.4dB/4.0° , **5 to **5dB 1.5dB/7.0° , **5 to **5dB 4dB/*2.0°
Trace Stability
 
Temperature DependencePer one degree of the temperature variation : 0.*2dB
Trace Noise MagnitudeIF bandwidth 3kHz : 0.**1dB rms
 
Other capabilities
 
1. Internal hard disk drive
Store and recall instrument states, calibration data, and trace data on internal hard drive. Trace data can be saved in CSV (comma separated value) format. Instrument states include all control settings, limit lines, segment sweep tables, and memory trace data.
 
2. USB
Instrument states, calibration data, and trace data can be stored on an external USB drive.
 
3. Screen hardcopy
Printouts of instrument data are directly produced on a printer. The analyzer provides USB and parallel interfaces.
 
4. Familiar graphic user interface
Protek A**3 provides graphic user interface based on Windows. There are three ways to operate A**3 manually: a hard-key interface, a touch screen interface, mouse interface.
 
5. Limit lines
Defining the test limit lines that appear on the display for pass/fail testing. Defined limits may be of any combination of horizontal/sloping lines and discrete data points.
 
Programming functions
 
COM/DCOM Automation
 
Remote Control
LAN, GPIB (optional)
Operating environment
 
Temperature: *5 to **0°c
Dimension (W x H x D): **6 x **2 x **0 mm
Weight: *0.6 kg
Power supply: **0 to **0 VAC / *7 to *3 Hz