¿Aún no es miembro de TradeKey.com? Regístrese para conectarse con 9 millones de importadores y exportadores a nivel mundial.
registro |
BOOK A CALL
Book Call On Your Favorite Time

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services

Contact Us
product
Prev
Power Supplies for CO2 laser tubes
Next

Power Supplies for CO2 laser tubes

( Negotiable )

|

6 Piece Minimum Order

País:

China

N º de Modelo:

PS-F-N100

Precio FOB:

( Negotiable ) Obtener el precio más reciente

Lugar de origen:

-

Precio de pedido mínimo:

-

Cantidad de pedido mínimo:

6 Piece

Detalle de embalaje:

-

El tiempo de entrega:

-

Capacidad de suministro:

-

Tipo de pago:

-

Grupo de productos :

-

Contactar ahora

Persona de contacto zhang

Beijing, Beijing

Contactar ahora

Descripción del producto

EFR power supplies for CO2 laser tubes adopt zero-current half-bridge soft-switch circuit to ensure the equipment has advantages of high efficiency, rapid response speed and simple port control, and applicable to two signals high and low level. TTL level is to control the laser on/off, in the meantime, the power supply has an anomalistical protective switch to check whether the outer water and air, etc. are free or not. Adjust the laser power: Input imitative signal, from 0 to 5V, or PWM signal to control the output laser power Ageing test before leaving the factory: Each power supply before sold will go throuth the ageing tests, which is made at tempareture *5ºC with full-load condition and sustains *0 hours, is turned on/off **0 times within 7 seconds Main features of EFR Power Supply:
1、Excellent compatibility .
2、Extending the lifespan of the laser tube
3、Power supply has a feedback port, which can be used for closed-loop control and also for checking the laser tubes operating current.
4、Power supply iteself has a protection while in open-circuit state: Under the outer shell of the power is well connected with the ground, the power supply can be used in open-circuit state within a short time so as to avoid damaging the power supply when the laser tube leaks. Furthermore, the poewr supplys working lifespan will be prolonged.

Model PS-N*0/*0 PS-N**0 PS-N**0/**0
Input Voltage AC**0V or AC**0V(please attach a note when placing an order)
AC Frequency *7―**0Hz
Cold Surge Current ≤*0A( AC**0V)/≤*0A( AC**0V)
Leakage Current ≤0.7mA( AC**0V)/≤0.4mA( AC**0V)
Max Output Voltage DC *5KV DC *0KV DC *0KV
Max Output Current DC *5mA DC *5mA DC *8mA
Efficiency ≤*2% (full-load)
MTBF(Mean Time Between Failures) ≤****0 hours
Response Speed ≤1ms(from Switching signal to the output current achieve to *0% of Pre-set current
Control Port TTL Level switch control, valid level has high/low choices.
Voltage-resisting ―output,―machine shellï¼›AC***0V *0mA *0s  output cathode is connected with the machine shell
Protection Used in open-circuit state within a short time (request that the outer shell be well connected with the ground , in the meantime, avoid arcing between anode and machine shell.)
Working Environment Work temperature:(**0―*0)℃。 Relative humidity:≤*0%
Cooling Type Forced air cooling
Size L×W×H(mm) **0×**9×**7 **5×**9×**7 **2×**9×**7

País: China
N º de Modelo: PS-F-N100
Precio FOB: ( Negotiable ) Obtener el precio más reciente
Lugar de origen: -
Precio de pedido mínimo: -
Cantidad de pedido mínimo: 6 Piece
Detalle de embalaje: -
El tiempo de entrega: -
Capacidad de suministro: -
Tipo de pago: -
Grupo de productos : -
Power Supplies for CO2 laser tubes

Productos relacionados Beijing EFR Laser S &T Co.,Ltd

Send a direct inquiry to this supplier

A:

zhang < Beijing EFR Laser S &T Co.,Ltd >

quiero saber: