❯

BOOK A CALL

Book Call On Your Favorite Time

I'm a Buyer I'm a Supplier

🗘

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services

HIPS 3d Printing Filament For 3d Printing Machinery by REPRAPPER

Precio FOB

Obtener el precio más reciente

USD ( Negotiable )

5 Piece Minimum Order

País:

China

N º de Modelo:

RE-HIPS-1.0

Precio FOB:

USD ( Negotiable )(Negociable) Obtener el precio más reciente

Lugar de origen:

Precio de pedido mínimo:

Cantidad de pedido mínimo:

5 Piece

Detalle de embalaje:

Vacuum Package with Desiccant

El tiempo de entrega:

5 days

Capacidad de suministro:

10000 Kilogram per Month

Tipo de pago:

Grupo de productos :

3D printing filament

Contactar ahora

REPRAPPER TECH Co., Limited

China

1888 Puntos de confianza

1st Año

Persona de contacto Ms. Jane

Unit 04, 7/F, Bright Way Tower, No.33 Mong Kok Road, Kowloon, HK, Guangzhou, Guangdong

Contactar ahora

Especificaciones del producto

color:purple/orange/yellow/red/black/blue etc.
Applicability:Makerbot/UP!/Afinia/Solidoodle etc who use 3.0&1.75mm 3D

Descripción del producto

Specification:

Material: HIPS
Color: purple/orange/yellow/red/black/blue etc.
Filament diameter: 3.0&1.*5 mm
Tolerance: ± 0.*5mm
Print temperature: **0~**0ºC
Spool capacity: 1kg(Can be customization)

Why HIPS?
1) High strength
2) A kind of supporting materials,can be dissolved in dilute lemon.

Why us?
1)   Top 3D printer supplier's top choice.
2)   Most innovation on 3D printer field over the world.
3)   Not only tight quality control on products itself, the more important is the systematic quality control on the whole supply chain.
4)   Fast delivery. Ship out products within 5 days for all color and material if less than ***0 kg.
5)   Spool can be customization but need longer time.
6)   Accept OEM/ODM over the world for large order.

Tips:
How to get a perfect printing model?
In fact if you want to get a perfect printing model, you need a reliable printer with the 3D printer at right temperature under right parameter setting. It means that your printer should under good condition; your filament should be good enough too. The following tips are based on this question.

Tip 1: What is your idea printing temperature?
In fact different printer series and different printer sensor has different temperature tolerance.
Regardless sensor difference, the printing temperature of REPRAPPER filaments are as follows.
* ABS filament is **0~**0°C, the idea temperature is **0°C.
* PLA filament is **0~**0°C, the idea temperature is **0°C.
* HIPS filament is **0~**0°C, the idea temperature is **0°C.
* Nylon filament is **0~**0°C, the idea temperature is **0°C.
Different color has little variance.

For UP and Afinia printer, you can use it directly under ABS or PLA mode (Depends on what material you bought). For Makerbot, solidoodle etc printer that allows you change the temperature, you can set a temperature (e.g. **0°C), then extrude the filament manually before printing. If you saw the filament can be extruded out smoothly without bubble, it means that temperature is ideal
setting.

Tip 2: How to avoid printing parts tilt?
It is very important for the first layer. You want to get a successful printing model you need to assure the platform is leverage. If the platform is not leverage the probability of tilt will increase. Before you begin your job you need to confirm the nozzle to all platform distance is the same.

For big parts, it is important to pre heat the platform for ABS and HIPS.
The filament can be stick on ABS board/ Perf board/3M blue tape/Kapton tape etc.
When you printing, the closer between nozzle to platform the better but should not break the platform.

Tip 3: How to avoid printing failure?
Before you begin your job, you need to confirm:
1)   The filament is good, no clog and with consistence diameter. Wired well.
2)   The filament feed system can feed the filament smoothly to avoid lack of filament in the extruder during printing.

During printing you need to confirm:
1)   The temperature is ideal and the extruded filament at nozzle is smoothly without bubble.
2)   The first layer is OK as mentioned above.

Now starting your 3D printing journey !
REPRAPPER,
Beyond Imagination through Innovation!

País:	China
N º de Modelo:	RE-HIPS-1.0
Precio FOB:	( Negotiable ) (Negociable) Obtener el precio más reciente
Lugar de origen:	-
Precio de pedido mínimo:	-
Cantidad de pedido mínimo:	5 Piece
Detalle de embalaje:	Vacuum Package with Desiccant
El tiempo de entrega:	5 days
Capacidad de suministro:	10000 Kilogram per Month
Tipo de pago:	-
Grupo de productos :	3D printing filament