Descripción del producto

1. Safety Regulations
 1) Do NOT use in humid places.
 2) Store in cool and dry places.
 3) It is advised NOT to disconnect the power line from the main
      power while being operated.
 4) Disconnect the line connected to the battery first and then, disconnect
       the power line in order to stop charging while being operated.
 5) Do NOT use in dusty places.
 6) Do NOT use in hot places with the direct sunlight and flammable
      substances.


2. Pre-use precautions
 1) Please use after reading this user manual thoroughly.
 2) Please check the condition of the connector and wiring
      connections connected to the battery.
 3) Please check the power line connection.
 4) Do NOT use a defective battery.
 5) Use single phase **0V for power voltage.

3. How to charge a battery
 1) Connect the charger power line to the power outlet.
 2) Connect the output line connector to the battery connector.
 3) Check the Red LED is on.
 4) Check the fan of the charger works.
      -When the fan is being operated,
        it makes a fine noise.
 5) LED indication while charging.
 6) Check the charging is complete.
     - When the charging completes, Green LED turns on.

4. Main functions
 1) Low voltage battery sensing function.
   - It automatically stops charging when the battery is aged or connected to
     a low voltage caused by a defective product. In this case,
     the Red LED -> Green LED flash in turn.
 2) Internal temperature sensing function.
   - If charging the battery in a place with a high temperature, causing the
      rise in the internal temperature of the battery, it automatically shuts
      off the to protect the charger,
      and the Red LED -> Yellow LED -> Green LED flash in turn.
   - If the internal temperature of the charger rises above *0°C, the charging
     is reduced by *0% at every 5°C increase, and it automatically stops
     charging above *0°C. (*0% of the charge capacity at *5°C)
   - It will be re-operated as the internal temperature of the chager decreases.
 3) Over-voltage and over-current protection functions.
   - In case of an external overvoltage and battery malfuction,
     it stops operating by the internal protection function.
 4) Battery sensing function while charging.
   - When the charger output line is disconnected or, no charging current
     in the battery, it stops charging.

5. Diagnosis and removal of errors. (What to do when)
 1) In case of which the Red LED is NOT on after the charger power line
     is connected to the main power outlet and the battery output line is
     connected.
   - Check the connection of the main power and battery.
 2) A few seconds after the initial charging, the Red LED -> Green LED flash
     in turn.
   - Check the connection condition of the output line and connectors
      connected to the battery.
   - Check the voltage status of the battery. (if below DC *6V, it recognizes
     a low voltage battery and stops charging.)
 3) In case of which it stops charging and the
     Red LED -> Yellow LED -> Green LED flash in turn,
   - Check if the temperature of the place where being operated is too high.
     Check if there is the direct sunlight in the place where being operated.
 4) Please contact our head office if any other charger error conditions occur
     or our product is NOT operable.