Descripción del producto

HIR/**0 *@******************** reactive resin dipping
Of grade H
The mechanical properties of excellent and durable
Of high toughness
Company passed UL certification (certification number: E****1)
summary
The two groups of high temperature resistant, light yellow transparent unsaturated polyester resin, with Damidil ***7 as the reactive diluent, thermal crosslinking with H
Durable high temperature resistance.
H UL level, authentication number: E****1.
This product is a two-component product, need to use 1% Damicat ***6, namely the resin products *0kg need to be equipped with **0g ***6.
The viscosity of the product is **0mPas, but the series products are **0mPas and **0mPas viscosity products.
application
The machine is suitable for the coil, especially for the motor and the stator coil with high mechanical strength, and it can be dipped, rolled and continuous.
With 1% of the ***6, the reaction activity increased, the crosslinking process becomes short; if the ratio to 2%, can accelerate the crosslinking process.
operation
With 1% Damicat ***6 HIR *****2 products can be used for any automatic or manual drop leaching equipment. According to different
Type of motor to select resin parameters and viscosity. HIR *****2 series is now available in **0mPas, **0mPas and **0mPas
Three viscosity specifications in order to avoid user dilution adjustment and the risk of operating errors.
For fine wires it is difficult to penetrate, ***7 can be used to dilute the required low viscosity.
Crosslinking process: Copper test, **0oC ****0 minutes, **0oC minutes *5.
The resin can be improved by increasing the catalyst content (2%) in order to accelerate the crosslinking process.
The resin should avoid contamination, and be placed in the environment of "*5oC".
As is stored in large tanks, must regularly test the viscosity change.
After the mixed catalyst, ****-HIR Damisol products can be *3oC conditions at least stable for a week.
packing
*0kg.
**0kg barrel
storage environment
When the two components HIR *****2 products are stored in a closed container, the effective period is up to 9 months (*3oC) or *2 months.
(*5oC).
Such as storage tank, it is recommended to keep in dry air at standard atmospheric pressure; at the same time, suggest tanks do not put full, the
Up to *0% of capacity.
From time to time, mixing the resin, the oxygen will penetrate into the resin, so as to improve the validity period.
health and safety
Avoid contact with skin and eyes.
Operate in a ventilated environment and keep away from fire.
Product data
Physical performance unit data reference standard
Shore D hardness *8 ISO **8
The flash point of oC = *2
Viscosity (Brookfield, *3oC) mPas **0 + *0
Gel time (**0oC) Mn 2 ~ 4
Mechanical properties
Bond strength (*3oC) daN *4 IEC ***3
Bond strength (**0oC) daN *3 IEC ***3
Bond strength (**5oC) daN *7 IEC ***3
Bond strength (**0oC) daN *5 IEC ***3
Chemical properties
Water absorption (7 days *3oC)% less than or equal to 0.*6 ISO *2
Chemical resistance (2% NaOH)% 0.*9 ISO **5
Chemical resistance (*0% HCl)% 0.*4 ISO **5
Electrical properties
The insulation strength (*0% R.H, *3oC) kV/mm = **0 DIN ****8 / VDE ***0