Descripción del producto
CELdek® ****- *5 / Rder& ****- *5 evaporative
cooling pad is used in systems where high efficiency cooling is
required. It can be used for many different cooling purposes but is
particularly suitable for cooling of live stock buildings and
greenhouses when higher air velocity is required.
The Green stripe pad consists of specially impregnated and
corrugated cellulose paper sheets with different flute angles, one
steep (*5 deg) and one flat (*5 deg) that have been bonded
together. This unique design yields a cooling pad with a high
evaporation efficiency while still operating with a very low
pressure drop. In addition scaling is kept to a minimum and no
water carry-over occurs due to the fact that the water is directed
to the air inlet side of the pad. This is where most of the
evaporation takes place.
The impregnation procedure- for the cellulose paper ensures a
strong self supporting product, with high absorbance, which is
protected against decomposition and rotting and therefore
increascing longevity.
The distribution pad constitutes a vital part of a complete
system and should always be ordered in combination with Rder&
evaporative cooling pads. Placed on top of the cooling pad it
ensures a uniform supply of the water to the cooling pad and
minimises the risk of dry spots.
The evaporative cooling technology
Water is circulated through a pump station and supplied to the
top of the cooling pad via a distribution manifold. A distribution
pad on the top of the cooling pad ensures an even water
distribution. The water flows down the corrugated surface of the
Rder& evaporative cooling pad.
Part of the water is evaporated by the warm and dry air that
passes through the pad. The rest of the water assists in washing
the pad, and is drained back to the pump station through a gutter
system.
The heat that is needed for the evaporation is taken from the
air itself. The air that leaves the pad is therefore cooled and
humidified simultaneously without any external energy supply for
the evaporation process. This is natures own cooling process.
Equipment
High evaporation efficiency
Superb wetting properties
Low pressure drop when wet, leading to lower operating
costs
No water carry-over
Low scaling
Self cleaning
Strong and self supporting
Long life time
Low running costs
Quick and easy to install
Environmentally friendly
Consistant high quality
Performance curves: The pressure drop diagram shows the
pressure-drop over the pad in the wet condition. With the pad in a
dry condition the pressure-drop is <*0% less. There for there is
minimal loss of air-flow when the pad is wet compared to when it is
dry.
Order Information Evaporative Cooling Pads
Rder& ***0 - *5 - Height,mm - Width, mm - Depth, mm (e.g.,
Rder& *******************0)
Standard Heights: H = ***0,***0,***0 and ***0 mm
Standard Width : W = **0 mm
Standard Depths: D = **0,**0, **0 and **0 mm
Order Information Water Distribution Pads
Rder& ****0 - 0 - Width, mm - Depth, mm - Thickness,mm (
Rder® *****************0)
Standard Width : W = **0 mm
Standard Depths: D = **0,**0, **0 and **0 mm
Standard thickness: C = *0 and *0 mm
Rder& is developed by Rdercorp and marketed
worldwide.
País: |
China |
N º de Modelo: |
7090/ 5090
|
Precio FOB: |
210 ~ 470 / (Negociable)
Obtener el precio más reciente
|
Lugar de origen: |
SHANDONG |
Precio de pedido mínimo: |
210 |
Cantidad de pedido mínimo: |
10000 Cubic Yard |
Detalle de embalaje: |
carton |
El tiempo de entrega: |
7day |
Capacidad de suministro: |
1000 Ampere per Day |
Tipo de pago: |
T/T, L/C |
Grupo de productos : |
Evaporative Cooling pad
|