Beryllium Copper CuCoNiBe

Descripción del producto

CuCo1Ni1Be—CW**3C Cobalt Nickel Beryllium Copper

CuCo1Ni1Be—CW**3C (DIN 2.***5)Cobalt Nickel Beryllium Copper Alloy contains approximately 1% Cobalt, 1% Nickel and 0.5% Beryllium. After hot forging and heat treatment processes this material gains considerably hardness, electrical and thermal conductivity as well. It is possible to have different combinations of electrical conductivity and hardness by changing the heat treatment conditionsï¼›CuCo1Ni1Be also Offers good strength and hardness characteristics coupled with conductivity in the range of ****0 percent of copper with ultimate tensile and hardness properties approaching **0 ksi and RB **0 respectively, all of its properties are quite the same as CuCo2Be-C****0 and CuNi2Be-C****0.

Typical Application for CuCo1Ni1Be - Cobalt Nickel Beryllium Copper Alloys

Electrical:Fuse Clips, Switch Parts, Relay parts, Connectors
Industrial:Spot Welding Electrodes, Electrode holders and Seam Welding discs in Resistance Welding, Plunger Tips in Aluminum Die Casting Machines, Injection Nozzles, Cooling Pins in Plastic Injection Machines, Mulds for Casting of Non-Ferrous Materials, Tooling for Plastic Moulds ,Butt Welding Jaws, Contact Tips for Submerged-Arc-Welding

Available Sizes:
Custom Diameter & Sizes, Random Mill lengths

Available Products (forms):
Round bars, Flat bars, Square bars, Rectangular bars, Hexagon bars, Plates, Sheets
Custom shapes are available upon request.

Chemical Composition:

Be: 0.***0.*0%
Co: 0.***1.*0%
Ni: 0.***1.*0%
Cu: Balance
Note: Copper plus additions equal *9.5% minimum.

Typical Physical Properties:

Density (g/cm3): 8.*3
Density before age hardening (g/cm3): 8.*5
Elastic Modulus (kg/mm2 (**3)): *4.*0
Thermal Expansion Coefficient (*0 °C to **0 °C m/m/°C): *7 x ***6
Thermal Conductivity: **9 W/m • oK at *0 C
Melting Range (°C): ********0

Note:
1). the units are based upon Metric.
2). the typical physical properties apply to age hardened products.

International Specification:

Rods/Bars/Tubes: ASTM B**1, SAE J**1,**3; RWMA Class 3
Sheets: ASTM B**4
Wires: ASTM B**1
Plates:ASTM B**4, SAE J**1,**3; RWMA Class 3

European Standards: CuCo1Ni1Be, DIN 2.***5; CW**3C to EN

Note:
ASTM:American Society for Testing and Materials
SAE:Society of Automotive Engineers
AMS:Aerospace Materials Specification (Published by SAE)
RWMA:Resistance Welder Manufacturers' Association
Note:Unless otherwise specified, material will be produced to ASTM.

Mechanical Properties:

The Mechanical Properties will be available on request from customers.

Most Commonly Temper Used:

Rods/Bars: A(TB*0),H(TD*4),AT(TF*0),HT(TH*4)
Sheets: A(TB*0),1/4 H(TD*1),1/2 H(TD*2),H(TD*4),AT(TF*0)
Wires: A(TB*0),1/4 H(TD*1),1/2 H(TD*2),3/4H(TD*3),H(TD*4)
Plates: AT(TF*0),HT(TH*4)