Alternative System for Laying Hens Housing

Descripción del producto

The TEXHA company presents one of their brand new products – the Alternative System for Layers Housing. It’s produced on
the base of the TEXHA’s regular cage for layers housing according to European standards, which is well-known in poultry world
and appreciated by the poultry specialists. The system was created for housing of commercial layers according to the European
standards.
The system has all the advantages of regular cage: it provides the optimal conditions for poultry housing, significantly saves
your money and has long exploitation terms. The main distinction of the system is the bigger space, which is provided for poultry
pasture and includes the space under the system (the area from the floor to the first tier).
Why it is so important? The system does a significant contribution into increasing the quality
of your product. The wide space for pasture guarantees health of the poultry and, correspondently,
the higher rate of egg-laying qualities and quality of eggs.
How TEXHA provides the comfortable poultry housing in the system? The doors of the system
may be opened upwards. The layers are able to go out of the system through the open door
and walk on the area above the egg collection tray, under the system, or move from tier to
tier. That’s why the pasture area increases.
Taking into consideration that the layers may go out on the floor of poultry house, the floor
area is added to the usable area.
In accordance with your requirements, the niche under the battery may be closed.

What does the system provide?

1. Optimal conditions for poultry housing
The system is equipped with 3 roosts, which help birds to feel free and protects them
from emotional stress because of the closed space
The nest with a shutter lets the birds feel comfortable
The incline of the floor is 7°. It enables free rolling down of eggs onto the egg-gathering
belt. The nests are located close to egg-gathering tray, what helps to reduce the incision
on eggs while their rolling down. The protective shield made from galvanized steel preserves
eggs from pecking and prevents falling of manure into egg-gathering tray
Using of solid diametrical galvanized partitions with perforation makes the system
firm, improves the micro-climate in the poultry house, provides good air conditioning
The minimal using of plastic elements improves the hygiene and enables washing with
hot water under the pressure

2. Exploitation period
The system is made of high-quality steel
covered with 1 class zink
The floor mesh is very firm
The steel file-hard sprockets
are used in the drives
The necessary firmness reserve
has been provided

3. Low exploitation expenses
The energy-saving technologies
are used in the system. The electrical
devices power is 4.8 KW in each
battery
The lift egg-gathering system
saves energy and labor expenses
The system of planned-prophylactic
repairs has been created

FEEDING SYSTEM
The equipment has automatic feeding system and chain feed distribution.
Being installed inside of the system it enables doubling of feeding front.
Feeding System Components
- Hopper
- Feed distribution chains
- Feed chute
- Feed distribution drive
- Turner
Feeding System Advantages
- Effectiveness and durability
- Easy installing
- Feed loss reducing
- Perfect solution for any poultry house
- Grooved shiny hopper surface does not allow feed overheating
- Feed distribution productivity – **6 tons per hour

DRINKING SYSTEM
Drinking system in the equipment is simple, reliable, and effective.
Drinking System Components
- Water treatment unit: water meter, medicator, two filters for
mechanical water cleaning, manometers, stop valves
- Water distribution system
- Drinking lines
Each system is equipped with three drinking bowls. It provides birds
with necessary amount of water. The pressure control may be installed into drinking system if required.

MANURE EVACUATION SYSTEM
The manure evacuation system enables fast and qualitative manure removing. The system’s drive is powerful, simple, reliable,
and durable.
The drive system is used for driving of manure evacuation belts.
It has built-up construction and consists of sides of 2 mm width
and driving drums, which are installed on the special bearing with
spherical circular surface. The driving of drums is done by motorreductor
(2 drums per 1 motor-reductor).
The take-up station controls and tightens the manure evacuation belts.
The framework of the stations is dismountable. It is made of galvanized
steel. The belt is tightened by shaft with a spiral screw by means of the
chain through the ratchet mechanism. The belts wart may be removed
by means of the screws located on the brackets of shaft’s fastenings.
The shaft and scrapers enable inside cleaning of the belt.
The longitudinal manure evacuation belts are made of solid
polypropylene and installed under each tier. They are cleaned by scrapers made from wear-resistant material. The system provides
fast and qualitative manure evacuation onto diametrical transporter.
Manure is removed from the poultry house by inclined transporter and loaded onto vehicle. The air humidity while manure evacuation
is up to *5 %. It helps easy evacuation of manure and immediate using it as fertilizer. Timely manure evacuation and right manure
consistence don’t let the excessive ammonia and water evaporation. It contributes into favorable climate in the poultry house.

EGG GATHERING SYSTEM
TEXHA offers using of lift or elevator egg gathering systems. The systems work in reliable, careful, and accurate way. The other
advantages of the systems are: labor reducing while gathering
and sorting of eggs, adherence to the specifications, birds’ stress
reducing.
Components of Lift Egg Gathering System
– Longitudinal belt transporter
– Diametrical transporter with lift mechanism
– Inclined egg gathering transporter and roll-table
The elevator egg gathering system includes universal elevator
for egg gathering and laying onto egg transporting system. One
elevator is installed at each battery. It can be included into general
line of eggs transporting.

Technical Characteristics of the System for Layers Housing
Number of tiers 3
Width of the system ***0 mm (6 ft)
Depth of the system ***4 mm (5'3")
Distance between tiers **0 mm (2'3")
Facade height **3 mm (1'*1")
Height inside the system **4 mm (1'7")
System area 2.*5 m2 (*1.*9 sq ft)
Feeding tray length ***0 mm (*0 ft)
Floor mesh
Incline 7°
Cell size *5x*0 mm (0.*8 x 1.*7 in)
Wire diameter 2 mm (0.*8 in)
Birds’ quantity in the system depends on the poultry house parameters
and meets the European standards.

Technical Characteristics of Equipment
Parameters Numerical Value
Compartment size ***0x***4 mm (6 x 5'3")
Module height ***0 mm (8'7")
Total area for layers housing ***4.*8 m2 (*1 **9 sq ft)
Effective area for layers housing ***3.*4 m2 (*6 **5 sq ft)
Total mesh floor area ***7.*1 m2 (*8 **3 sq ft)
Number of batteries 7
Number of tiers 3
Number of partitions *8
Number of compartments ***8