Precio FOB
Obtener el precio más reciente0 ~ 10.5 USD
|250 Gallon Minimum Order
PaÃs:
USA
N º de Modelo:
1180-01/05
Precio FOB:
0 ~ 10.5 USD Obtener el precio más reciente
Lugar de origen:
-
Precio de pedido mÃnimo:
-
Cantidad de pedido mÃnimo:
250 Gallon
Detalle de embalaje:
-
El tiempo de entrega:
-
Capacidad de suministro:
-
Tipo de pago:
Other
Grupo de productos :
-
Persona de contacto Mr. Steve
6940 Tremont Road, Dixon, California
| PRODUCT DATA                                                   COLORS |
| Virgin                                                                           Available in assorted stock colors. |
| Low Odor                                                                    Custom colors and specialty                            |
| Environmentally Preferred                                          products are available. |
| Excellent Quality                                                                                  |
| Semi-Gloss Finish                                                     V O C |
| Excellent Adhesion                                                     MAXIMUM VOC |
| Easy Application                                                       <**0 GRAMS PER LITER |
| ·        Soap & Water Clean-Up                                                <.*3 POUNDS PER GALLON |
|                                                        |
| DRYING                                       |
| ·        To Touch *0 - *0 minutes                                             SURFACE & APPLICATION |
| ·        To Re-coat 4 - 6 hours                                                |
| ·        Times may vary depending                                           WOOD: Clean, dry & dulled surface optimal. Remove |
| on environmental conditions,                                            all loose & flaking paint. Remove loose |
| Temperatures & humidity                                                 Unstable wood fiber. Prime all new wood |
|                                                                                                                                   with appropriate primer. |
| PHYSICAL PROPERTIES                     |
| ·        Finish: SEMI GLOSS                                               METAL:  Clean, dry & dulled surface optimal. Prime |
| ****0% *@********************‚ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â all new metal with appropriate primer. |
| Approximately *5% Volume Solids                                   Surfaces to be rust free, and clean from |
| ·        Package Viscosity *****1O KU                                                                  all forms of contaminates. |
| ·        Approximately ******0 sq. ft. per gal |
| ·        1.5 to 1.7 Mils DFT                                                      MASONRY: Clean, dry & dulled surface optimal. |
|                                                                                           Allow ****0 days for all new masonry |
|                                                                                    to cure and to provide proper pH |
| APPLICATION METHODS                                  before priming & painting. |
| Product may be applied with brush, roller or airless sprayer.  |
| Maintain a 'wet edge" and apply coating uniformly. Do not                             CAUTION: |
| Apply if material, air or surfaces Temperature is below *0° F    Avoid CONTACT WITH SKIN & EYE’S. NOT |
| Surfaces and ambient temperatures must be between *8° F    TO TAKE INTERNALLY. WASH THOROUGHLY |
| and **0° F 5° above dew point and remain above *8° F           AFTER USING PRODUCT. ADDITIONAL SAFETY |
| a minimum of four hours after application. Test all                     & HANDLING INFORMATION AVAIABLE WITHIN |
| products for compatibility prior to application                                      MATERIAL SAFETY DATA SHEETS (MSDS). |
|                                                                                                                              KEEP THIS AND ALL PAINTS OUT OF REACH THINNING & CLEAN UP                                           FROM CHILDREN. ALWAYS USE IN WELL |
| Product is supplied without the need for thinning                       VENTILATED AREAS.KEEP FROM FREEZING. |
| MAXIMUM ½ pint per gallon added if thinning is required.                                 IRRITATION FROM PAINT TO EYES, NOSE, SKIN |
| Clean up with warm, soapy water.                                                         COULD OCCUR. FLUSH EYES FOR *5 MIN IF |
|                                                                                                                              EYES COME IN DIRECT CONTACT AND |
|                                                                                                                              COUNSULT PHYSICIAN IMMEDIATELY. |
| PREVIOUSLY PAINTED   |
| Surfaces to be painted should be clean, dry & dull before painting. Surfaces should be washed, rinsed, and free from oil, dirt, mildew, flaking or loose paint. Fill all voids with substrate specific patching materials. The longevity and success of any paint job begins with a clean, sound and properly prepared substrate. For additional product recommendations and surface preparation please call (**6) *******9                  |
| PaÃs: | USA |
| N º de Modelo: | 1180-01/05 |
| Precio FOB: | 0 ~ 10.5 Obtener el precio más reciente |
| Lugar de origen: | - |
| Precio de pedido mÃnimo: | - |
| Cantidad de pedido mÃnimo: | 250 Gallon |
| Detalle de embalaje: | - |
| El tiempo de entrega: | - |
| Capacidad de suministro: | - |
| Tipo de pago: | Other |
| Grupo de productos : | - |
