Descripción del producto

Basic technical parameters of the motor:
1.Reference voltage **0V, reference frequency *0Hz. The voltage and frequency of the reference point can also be determined according to the user's requirements.
2.The reference working system of the electric motor is a continuous working system S1, and it can also be adapted to other working conditions of S2 to S9.
3.Motor insulation class H
4.The motor's enclosure protection class is IP*4, IP*5 and IP*6 can also be produced as required, and the cooling method is IC**0 (closed surface cooling).
5.The speed range of the motor is wide, and it adopts V/f control. The frequency conversion range is 1～**0Hz, among which 1～*0Hz is the constant torque speed regulation, and *0～**0Hz is the constant power speed regulation ( the output power is constant). With vector control, the variable range is wider and the low frequency performance is better.
6.The motor has a large overload capacity, and the overload capacity can reach 3.0 times the rated torque (2.0 times that of general motors).
7.The low-frequency starting torque is large, and the starting torque at a frequency of 1 Hz can reach 1.3 to 1.8 times the rated torque.
8.Good low speed performance. Smooth torque at low speed without creeping phenomenon.
9.Junction Box. Junction box standard position: The junction box of H******5 frame is viewed from the transmission end. On the left side of the frame, the H******5 frame junction box is located on the top of the non-drive end frame.