Descripción del producto

Welding Grade Bauxite

Welding grade bauxite has tight regulation on presence of sulfur and phosphorus which are detrimental to the weld. When present at high concentrations, they induce porosity and cracking, and at lower concentrations, they adversely affect the impact strength of the weld. And moisture for welding grade bauxite should not exceed 0.5% because the potential for any moisture present withthin the flux to reduce to hydrogent, if exposed to a welding arc, the molten weld pool absorbs the hydrogen and will induce brittleness into the weld.



Application

Welding fluxes are a small but valuable market for calcined bauxite. Techniques for submerged arc welding require the use of a granular flux to shield the molten weld pool rom the atmosphere during the welds application or pacement.  Various proprietary compositions exist and in some cases calcined bauxite is incorportated into these formulations. Calcined bauxite may, in some instances, make up to *5% of the welding flux.

 

Specification for SNW*5 Calcined bauxite

Chemical Analysis                

Al2O3: min *5%                 

Fe2O3: max 1.8%                 

SiO2: max 8.0%                  

K2O: max 0.5%                  

S: max 0.*2%                   

P: max 0.*5% 

Available grain size 

**0mesh;**5mesh; **0mesh; **0mesh; ***0mesh; ***0mesh; or as customer's requirement. 

Package

1MT Jumbo bag

Standard exporting package for sea transportation or air delivery

Special packing requirement is acceptable