Welding Electrode

Descripción del producto

Welding Electrode AWS A5.1 
E6013 by ACME WeldCut, Quality Praised by customers in United Arab Emirates, Philippines, Malaysia, India, Saudi Arabia, and South Africa. 

Key Features:
Beautiful Welding Bead Appearance. 
Slag Easy to Remove.
Excellent in Vertical-Down Welding.



OEM Services
You have best-selling trademarks in your country ? Well, we offer OEM packaging under your trademarks. No additional cost. We eye on every detail and never damage your brands.



Quick Shipment: 
Our factory has capacity of 10000 tons per year. As a result, we can ship your order faster than others. We always ship our goods via direct vessels via Qingdao or Tianjin port.



Professional Services: 
With 10 Years' Experience in Welding & Cutting Industry, we are able to serve our customers very well. We keep full tracking of every order after sales. We always stand in our customers' side to quickly solve problems if any. Our persons continuously study the market and act upon customers' updated requests.

We Offer Free Samples for Your Approval.



Descriptions:
AM-6013(AWS A5.1 E6013) is a standard grade rutile type electrode. AM-6013 is primarily designed to provide good wetting and shallow penetration for thin sheet metal applications (using smaller diameter electrodes), but with sufficient penetration for welding medium gauge steel. As a result, AM-6013 is an all purpose electrode that provides a soft steady arc which is easily regenerated, easy slag control for vertical-down welding, low spatter and a beautiful bead appearance. AM-6013 may be used in any position with AC or DC.  

Typical Chemical Composition of Weld Metal (wt%):
Carbon (C)................0.058
Manganese (Mn).........…..0.29
Silicon (Si).................0.2
Phosphorus (P).............0.021
Sulphur (S)................0.009

Typical Mechanical Properties:
Yield Strength: 400 MPa
Tensile Strength: 460 MPa
Elongation: 20%

Note on Usages: 
Rutile type electrodes do not normally require re-drying prior to use, however, if suspected of being damp, it should be re-dried at 100 - 120 ºC for 1 - 2 hours. 

Size and Recommended Current Range (AC or DC):