Descripción del producto

 Specification:

1. Apply for camera model name: SONY NEX*5N
2. Maximum Waterproof Depth: *0 meters/ **0ft
3. Application temperature: **0 to *0 Celsius Degree
4. Waterproofing: O-ring & gasket
5. Shockproof: 1 meter shockproof
6. Materials: Polycarbonate ABS glass
7. Dimensions: **0MMwide***5MMhigh***6MMdeep
8. Weight: **0g

Full components of this underwater digital camera/DSLR housing case package:

• Neck Strap
• Wrist Strap
• Waterproof gasket
• Silicone Grease
• User Guide

Wherever you go, whether onto the beach or into the sea, your camera can go with you – when it's safe inside this underwater diving waterproof camera Case. Enjoy the fun and the freedom of being able to take any photo you want, whenever and wherever you want. Also you can use it freely in raining, snowy, windy and dusty places; this waterproof camera housing case will give you **0% protection of your camera

To get best photography and protection, pls read the user manual carefully before using this underwater camera housing.

Checking before Using:

1. Check if the water proof camera housing in good condition everytime before using it, make sure there is no sand or dust;
2. After coating waterproof oil, fill-up all tissues inside the case, and then close the case, put the case to at least **0MM depth of water and keep for at least 5 minutes, make sure there is no water get in.
3. After above two steps checking, you can put your camera in and use it freely now.

Maintenance after using:

1. Using fresh water to wash the inside of the case, do not use water tempreture higher than *0 celsius degree, otherwise will hurt the waterproof case
2. If use it in deep sea area, do wash it much longer time, suggest put it in fresh water for several hours
3. Make sure all the waterproof case inside the fresh water, including the safety lock of the waterproof case
4. After wash it cearly, use soft cloth to make it dry lightly, and put in the shade ventilated place to dry it
5. Residual seawater will damage the metal part of the case, it will hurt the , hinge and lock
6. Do use clean and soft cloth to clean the inside of the waterproof case
7. O-seal ring must be washed cleanly after take down, and use the seal bag to keep it safe; or put it on the waterproof case but not lock the case, to keep the o-seal flexible enough; whole box put into seal bag and keep it dry and safe, it will protect the waterproof case and make it work much longer time