Watercut Meter Suit Wellhead Crude Oil Water Cut Analyzer Online Crude Oil Water Cut Analyzer

Descripción del producto

1. Product description

 

Wellhead water content analyzer ALC**-…¡ is mainly used for water content measurement in oil field metering room and after multi-way valve group. It can be installed on the metering outlet process flow of electric multi-way valve or manual valve group in metering room to complete water content measurement of multi-way single-well liquid. Through two processesDN*0 (customized for other specifications) flange is directly connected to realize the functions of online real-time sampling and non-real-time measurement. The structure and measurement method of the wellhead water content analyzer eliminate the influence of gas or other impurities in crude oil on the water content measurement results, and improve the measurement accuracy. In addition, the meter also has an over-temperature protection function. The temperature sensor is installed at the inlet pipe. When the temperature of the medium is detected as high, the measuring pipeline is closed and no sampling is performed to protect the probe.



 2. Technical parameters

 

working power supply:AC**0V *0HzorAC**0V *0Hz;operating current:≤8A;
Interface:RS**5/ModBusRtucommunication
in-place display: liquid crystal display
electrical connection: signalM*0 * 1.5orG3/4internal thread; Power supplyG3/4internal thread
ambient temperature:**0 to *0„ƒ
measurement accuracy:±3%
measurement range:0% to **0%
installation location: wellhead/metered pipeline
: wellhead/Single Well Oil, Water and Gas Mixed Medium
installation method: pipe section installation, flange connectionDN*0PN2.5or custom
flange material:**4stainless steel
Material:**4stainless steel
liquid receiving material:**4stainless steel plus polytetrafluoroethylene combination
design pressure:4.0MPa
design temperature:0~**0„ƒ
Explosion-proof level:ExdibIICT6Gb
Protection level:IP*5

3.Technical features

Wellhead water analyzer ALC**-…¡ is generally composed of two sections of pipe bypass each other, one of which is provided with a measuring probe, called the measuring pipe section, and the other section without a measuring probe, called the bypass pipe section. The measuring section and bypass section switch automatically. The measurement process consists of the following steps: switching sampling, preliminary measurement analysis, heating stratification, water content stratification scanning measurement, calculation of comprehensive water content. At the same time when the liquid flow channel is switched to the bypass pipe section, the medium originally flowing through the measuring pipe section is intercepted and can be set to stand, heated, stratified and scanned for measurement at any set time interval. Due to the creation of a relatively static measurement environment, the stratification time of gas-liquid and impurities can be very long, and heating is assisted, so good measurement accuracy can be achieved. In addition to outputting moisture content measurement results, the instrument can even measure the gas-liquid ratio under working conditions.