Wall mounted public 1000W 50HZ hand dryer with over heating protection

Construction

1. Hand dryer cover shall be a one-piece, heavy-duty, rib-reinforced, die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically applied epoxy paint and fastened to a wall plate by two chrome plated tamper-proof bolts.
2. Hand dryer wall plate shall be equipped with (3) 7/8" (*2 mm) diameter holes, one of which shall be suitable for use with surface conduit, for ease of wiring.
3. All internal hand dryer parts shall be coated according to Underwriters' Laboratories, Inc. requirements.
4. Entire mechanism shall be internally grounded.

Mechanism

1. Hand dryer motor shall be a series commutated through-flow discharge vacuum motor/blower (5/8 HP / *0,**0 RPM) which provides air velocity of *6,**0 LFM (linear feet per minute) at the air outlet and *4,**0 LFM at the hands (4 inches [**2 mm] below air outlet).
2. Hand dryer heating element (***0 W) is constructed of Nichrome wire and mounted inside the blower housing, thereby being vandal proof. It shall be protected by an automatic resetting thermostat, which shall open whenever air flow is cut off and shall close when flow of air is resumed. It shall produce an air temperature of up to **5°F (*7°C) at a *2°F (*2°C) ambient room temperature at the hands (4 inches [**2 mm] below air outlet).
3. Hand dryer Control assembly is activated by an infrared optical sensor located next to the air outlet. The dryer shall operate as long as hands are under the air outlet. There is a **-second lockout feature if hands are not removed.

FB***2 Series

Voltage

**0V~/*0Hz

Rated power

***0W

Current

5.5A

Water splash proof

IP X1

Blowing volume

*3m3h

Air speed

*0m /s

Product Dimension

**0***0***5 MM

Unit weight

3.5kg

Carton Meas

**0***0***0mm

Package

4PCS(*1.5kg)

Payment Terms

L/C,  T/T

Minimum Order

***0pcs

Lead Time / Delivery Time

*5 Day(s)

Sample Available

YES

Delivery Details

*0% deposit by TT before production. The other *0% by T/T against the copy of B/L.

FOB Port

Guangzhou

Loading Info

We can deliver the goods to any port of Shenzhen free of charge.Factory located in Shenzhen and convenient to deliver to any port of Shenzhen.

Packing Info

1pcs/box; 4pcs/ctn; *4*5cm/ctn; *0.8kgs/ctn

Target Market(s)