Precio FOB
Obtener el precio más reciente400 ~ 800 USD / Metric Ton
|24 Metric Ton Minimum Order
País:
South Africa
N º de Modelo:
-
Precio FOB:
400 ~ 800 USD / Metric Ton Obtener el precio más reciente
Lugar de origen:
South Africa
Precio de pedido mínimo:
400 per Metric Ton
Cantidad de pedido mínimo:
24 Metric Ton
Detalle de embalaje:
25kg/bag
El tiempo de entrega:
7 days after payment confirmation
Capacidad de suministro:
10000 Metric Ton per Week
Tipo de pago:
T/T, Western Union, Money Gram
Grupo de productos :
-
South Africa
Persona de contacto Jose Gonzalez
Johannesburg, Gauteng
1. Virgin & Recycled
2. Type: Film grade, Injection molding grade, Blowing molding
grade, extrusion grade,
3 hdpe resin
1. we are direct factory, different MFR or MFI are available for your different usage.
2. good quality and reasonable price
3. non-poteonods no smell adurless
4. it can replaced original plastic material, sometimes it can replace new material
HDPE:
|
HDPE cable material |
Unit |
|
|
Mass density |
g/cm 3 |
0.****0.**9 |
|
Melt flow Rate(**0 |
g/*0min |
≤1.0 |
|
Tensile yield strength |
MPa |
≥*9.0 |
|
Flexural modulus |
Mpa |
≥**5 |
|
*@******************** |
% |
≥**0 |
|
Impact Embrittlement |
centidegree |
MAX ***8 |
|
Dielectric Constant |
**0KHZ |
2.*2 |
|
1MHZ |
2.*1 |
|
|
Loss Tangent |
**0KHZ |
MAX 0.***1 |
|
1MHZ |
MAX 0.***1 |
|
|
Volume resistivity |
OHM-CM |
MIN 1x*0 *5 |
|
Application |
|
|
LDPE:
|
Physical Properties |
Test Method |
Nominal Value |
Unit |
|
|
Density |
ISO ***3 |
0.**1 |
g/cm3 |
|
|
Melt Mass-Flow Rate (MFR) |
ISO ***3 |
1.9 |
g/*0min |
|
|
Hardness |
|
|
|
|
|
Shore Hardness (shore D) |
ISO **8 |
*5 |
|
|
|
Mechanical Properties |
|
|
|
|
|
Tensile Modulus |
ISO ****2 |
**5 |
MPa |
|
|
Tensile Strength |
Yield, |
ISO ****2 |
9.0 |
MPa |
|
Break, |
*3.0 |
MPa |
||
|
Tensile Strain(Break) |
ISO ****2 |
**0 |
% |
|
|
Modulus of Elasticity |
Internal Method |
**0 |
MPa |
|
|
Thermal |
|
|
|
|
|
Vicat Softening Temperature |
ISO **6/A*0 |
*9.0 |
°C |
|
|
Melting Temperature (DSC) |
DIN ****5 |
**8 |
°C |
|
|
Peak Crystallization |
DIN ****5 |
*7.0 |
°C |
|
|
Heat of Fusion |
DIN ****5 |
**0 |
J/g |
|
|
Electrical |
|
|
|
|
|
Volume Resistivity |
ASTM D**7 |
8.5E**5 |
ohm •cm |
|
|
Dielectric Strength |
ASTM D**9 |
*0.0 |
kV/mm |
|
|
Dielectric Constant (*0Hz) |
ASTM D**0 |
2.*0 |
% |
|
|
Dissipation Factor (*0 Hz) |
ASTM D**0 |
0.****0 |
||
LLDPE
|
Properties |
Test conditon |
Test method |
Test data |
Unit |
|
Density |
|
|
0.*1 |
|
|
MFI |
|
|
2 |
|
|
Drop impact strength |
|
ASTM D****9 |
*0 |
g |
|
Elongation ,vertical/ |
|
ASTM D***2 |
**0/**0 |
% |
|
tensilestrength,thermal |
|
ASTM D****4 |
**5/*5 |
Kg/cm |
|
elongation |
|
ASTM D***8 |
**0 |
% |
|
tensile strength |
|
ASTM D***8 |
**0 |
|
|
tensile strength,vertical/ |
|
ASTM D***2 |
**0/**0 |
|
|
Vicat softening point |
|
ASTM D****5 |
**3 |
°C |
|
melting point |
|
ASTM D****7 |
**6 |
°C |
|
Turbidity |
|
ASTM D****9 |
*2 |
% |
|
*5 glossness |
|
ASTM D****7 |
*5 |
% |
| País: | South Africa |
| N º de Modelo: | - |
| Precio FOB: | 400 ~ 800 / Metric Ton Obtener el precio más reciente |
| Lugar de origen: | South Africa |
| Precio de pedido mínimo: | 400 per Metric Ton |
| Cantidad de pedido mínimo: | 24 Metric Ton |
| Detalle de embalaje: | 25kg/bag |
| El tiempo de entrega: | 7 days after payment confirmation |
| Capacidad de suministro: | 10000 Metric Ton per Week |
| Tipo de pago: | T/T, Western Union, Money Gram |
| Grupo de productos : | - |
