Vacuum Double Stage Transformer Oil Purifier Machine

Descripción del producto

1.Usage

It is widely used in the oil purification treatment and vacuum hot oil circulation drying in the installation and maintenance of various large transformer equipment.. Not only use in Insulating oil purification treatment in **0KV***0KV transformer,but also applies to high-grade new oil, the high depth of processing imported oil. Compared with the single-stage vacuum purifier machine, the machine increases the Roots pump pressurization system,secondary high vacuum separation systems and three-dimensional flash rapid evaporation system , it can quickly dewater, degas, and remove the acetylene, acid value and free carbon , The transformer oil limit Breakdown voltage value will be higher after treated,It s not only used for oil purifier but also as a separate vacuum source which have the function of vacuum drying and oil injection for transformer equipment

2. Principle

The double stage Transformer oil filtration machine was designed according to decompression separation, precise filtration, Spiral spray atomization separation technology, molecular adsorption ,vacuum drying principle. The treated oil can meet the standard of the national standard.

3. Flow Chart

The oil to be treated passes through a strainer and enters the heater for heating, the heated oil will go through the semi precision filtration and arrived at the Spiral spray atomization separation system, The insulating oil turns into a coarse mist and falls onto the reaction tower to enter the vacuum separation chamber. The moisture begins to evaporate and the oil mist forms a three-dimensional, multi-layer evaporation structure in the tank, which can be purified through a short-term cycle. After dewater, degas, and impurity ,acid removal,the treated oil will go through the precision filtration to achieved the purifier circulation purpose.The Water vapor molecules and the hot air are separate from the vacuum separation chamber enters the condenser ,Most of the water vapor is condensed into water and stored in a water tank. The hot air in the oil is cooled and discharged by a vacuum pump.

4.Function

4.1. Dehydration, degassing and impurity removal of *******0KV main transformer insulation oil .

4.2. Acetylene removal of *******0KV main transformer insulation oil .

4.3. Vacuum drying of *******0KV main transformer insulation oil .

4.4. It can remove not only **0% free water and *9.9% dissolve water, but also **0% free gas and *8% dissolve gas.

4.5. Customized parts: PLC, frequency conversion technology, trailer and so on.

4.6. Advantages and characteristics

double stage Insulation oil vacuum purifier machine process design, double stage efficient vacuum system, kaiqian unique Vacuum separation technique,  it can quickly dewater, degas, and remove the acetylene, acid value and free carbon, colloid. increase oil limit Breakdown voltage value.

Oil initial value: water content: ≤*0mg / L, containing gas: ≤*0% (volume fraction), the breakdown voltage: ≥*5KV

Secondary purification: water content:≤*5mg / L, containing gas:≤0.1% (by volume), the breakdown voltage: ≥*0KV (ball electrode).

Three purification: residual moisture: ≤***0ppm, residual gas≤0.*5%, acetylene content :0, the breakdown voltage:≥*0KV (ball electrode)

Note: water content and gas content measurements in accordance with relevant GB, DL or IEC standards.

5.  After Treatment index of double stage transformer oil vacuum purifier machine

6. Technical parameters for transformer oil double vacuum filtration equipment