Precio FOB
Obtener el precio más reciente470 ~ 500 USD / Unit ( Negotiable )
|10 Unit Minimum Order
País:
Singapore
N º de Modelo:
Traxxas E-Maxx Mamba Brushless
Precio FOB:
470 ~ 500 USD / Unit ( Negotiable )Obtener el precio más reciente
Lugar de origen:
Singapore
Precio de pedido mínimo:
470 per Unit
Cantidad de pedido mínimo:
10 Unit
Detalle de embalaje:
-
El tiempo de entrega:
4-9 days
Capacidad de suministro:
100 Unit per Month
Tipo de pago:
T/T
Grupo de productos :
-
Singapore
Persona de contacto Sherly
#55-105 jalan bukit merah, blok A/II, Bukit Merah, Other
NEW 1:*0 Traxxas E-Maxx Mamba Brushless Edition 4WD Monster Truck QUICK FEATURES ON E-MAXX BRUSHLESS EDITION (#***8) NEW TQ 2.4GHz Transmitter and Receiver with Traxxas Linkâ„¢ Castle Creations Mamba Monster Brushless System Up to *5.2 Volts of Massive Brushless Power Traxxas Power Cell Batteries Included Heavy-Duty *7mm Hex Hubs New body design and graphics Aggressive 6.3†Maxx-Sized tires Black-Chrome 3.8†Split-Spoke wheels Traxxas TQ 2.4GHz Radio System Four-Channel micro receiver Top Speed: *0+mph out of the box, *5+mph all-out! Includes two Traxxas Power Cell Battery packs (NiMH, *-C Stick) Traxxas High-Current Battery Connectors TQ 2.4GHz High Output transmitter with Traxxas Linkâ„¢ Automatically stores and loads settings for up to *0 Traxxas Link-enabled models—just switch on and drive, “model selection†is not required. Multi-Function knob Adjustable steering and throttle percentage (dual rates) Adjustable steering and throttle sensitivity (exponential) Adjustable steering and throttle end points High *3ms frame rate and near-zero latency for responsive control *-channel micro receiver with dual channel*1 s Adjustable four-position wheelie bar Castle Creations Mamba Monster ESC 6.5mm gold-plated connectors Integrated cooling fan Heavy-duty construction Castle Creations Mamba Monster ***0KV Motor Machined heatsink can 5mm rotor shaft Brushless transmission with metal center idler gear Heavy-duty *7mm splined aluminum hex hubs and wheel nuts Tunable sealed differentials in Maxx® differential housings Backward compatible to all Maxx models Differential uses Revo®-Spec gears and components Revo®-Spec front, rear, and center driveshafts New heavy-duty Brushless Readyâ„¢ transmission Over two-times stronger than original E-Maxx transmission Steel idler gear Optional accessory two-speed adjustable ratio gear sets Close ratio or wide ratio for super-low first gear Available accessory single motor mount and gear cover Revo®-Spec Torque-Controlâ„¢ slipper clutch Quick release, battery hold down straps Reversible to accept stick packs and side-by-side packs Available accessory battery strap for oversized battery packs (sold separately) Long wheelbase, low center-of-gravity chassis increases stability Extended by *0mm Accepts *-cell or *-cell flat battery packs and LiPo packs of similar size Batteries sit lower in the chassis for lower CG Lower skid plate protects the center driveline while allowing quick access to the transmission Water-proof high-torque dual steering servos (#***5) Four-channel 2.4GHz micro receiver Two channel-one outputs for dual steering servos (no Y-harness required) Precision hex hardware throughout 6.3" diameter Maxx tires pre-glued on black-chrome Split-Spoke wheels Two-piece gear cover makes it easy to access and change gearing Requires removal of only one screw for access Sealed pivot balls and front/rear outer driveshafts Eight fully-adjustable, coil-over Ultra Shocks Integrated dual servo bellcrank and servo saver Watertight sealed receiver box **0% captured steering and toe linkage Double-shear components capture and secure all rod ends for unmatched durability Rear toe-links are captured by a thick tie-bar for double-shear strength Updated shock towers and adjustable body mounts Gray composite components Chassis, skid plates, bulkheads, shock bodies, spur gear cover Precision rubber-sealed ball bearings Blue-anodized aluminum antenna crimp nut Four-position wheelie bar included Fully painted, trimmed, and decaled ProGraphix® body E-MAXX BRUSHLESS EDITION (#***8) SPECS Length: *2.5 inches (**1mm) Front Track: *6.5 inches (**9mm) Rear Track: *6.5 inches (**9mm) Center Ground Clearance: 4 inches (**1mm) Weight: **4oz (4.*6kg) Height (overall): 9.5 inches (**1mm) Wheelbase: *3.2 inches (**5mm) Front Shock Length: XXLong Rear Shock Length: XXLong Front Tires (pre-glued): Maxx® (6.3" x 3.8") Rear Tires (pre-glued): Maxx® (6.3" x 3.8") Front Wheels: 3.8" Split-Spoke (black chrome) Rear Wheels: 3.8" Split-Spoke (black chrome) Speed Control Type: Castle Creations Mamba Monster Forward/Reverse/Brake Motor (electric): Castle Creations Mamba Monster ***0KV Transmission: Single-Speed (2nd gear only) Overall Drive Ratio: *0.*8 (stock, out-of-box) Differential Type: Bevel Gear, Sealed, Limited Slip Gear Pitch: **-Pitch Chassis Structure/Material: Molded Composite Nylon Tub Brake Type: Electronic Drive System: Shaft-Driven 4WD Steering: Bellcrank Radio System: TQâ„¢ 2.4GHz High Output with Traxxas Linkâ„¢ Top Speed: *5+mph (*5+mph w/ two 3S LiPo Batteries) Skill Level: 2 Included Batteries: Two Traxxas Power Cell Batteries (NiMH, *-C Stick) Required Batteries & Charger: 4 "AA" (transmitter) 7.2V or 8.4V Charger (6 or 7 cell) CASTLE CREATIONS MAMBA MONSTER ESC SPECS Input voltage (cells): *8 NiCad/NiMH 6s LiPo (max: *5.2 volts) Case Size: 2.2â€W x 1.9â€D x 1.4â€H Weight: 4.*7 ounces (**1 grams) On-Resistance (Trans)–FWD/REV: 0.***3 ? per phase Reverse Delay: Yes, with lockout
País: | Singapore |
N º de Modelo: | Traxxas E-Maxx Mamba Brushless |
Precio FOB: | 470 ~ 500 / Unit ( Negotiable ) Obtener el precio más reciente |
Lugar de origen: | Singapore |
Precio de pedido mínimo: | 470 per Unit |
Cantidad de pedido mínimo: | 10 Unit |
Detalle de embalaje: | - |
El tiempo de entrega: | 4-9 days |
Capacidad de suministro: | 100 Unit per Month |
Tipo de pago: | T/T |
Grupo de productos : | - |