Descripción del producto
Dual axis Pole solar tracker :
1) Both elevation and azimuth have slewing
driver, not linear actuator for elevation
2) The max power output of tracker can
reach *0KW
3) More steel is used, the weight of normal
tracker (*0panels) is about **0kgs or below, ours can reach
***0kgs, it will make the whole
tracker more wind resistant and stronger, wind loading is
*7m/s
4) The design is unique and simple, there are
two kind of mounting: flat plate and double layer
5) Light sensor control and time control
together
6) Lower noise to avoid affecting
resident
Standard solar panel:
1)***0***8mm
2)***0***2mm
3)***6***2mm
Structure material : Hot dipped galvanized steel
Max module power:*0KW
Net rack area:*0~*0sqm
Tracking technology: programmable logic controller(PLC)
astronomical program,adding light sensor controlling,
tracking accuracy can reach ≤1°
Wind protection system: Wind sensor , Working wind speed: *7m/s
.automactic horizontal positioning at wind speed greater than
*7m/ph
Foundation: steel cage with reinforced concrete, drawing will be
as reference
Tracking axis: 2 axes: azimuth and vertical
Power of motor: *0W*2
Angles of rotation:azimuth:***0 to **0 vertical:*0 to *0
Power supply to motor: **0V to **0V 3 phase,****0HZ depending on
location(US, Europe ect.)
Power consumption :0.5kwh/day
Working temperature:**5C to **5C
Design lifetime : *5 years above for Mechanical part,3 years
above for motor
Automation: independent PLC on each tracker with possible
interconnection and remote control(optional)
Bearing and turn regulation: Motorized bearing for azimuth and
vertical tracking activated by planetary gear reducer
Article from wikipedia
Tip-tilt dual axis tracker (TTDAT)
A tip-tilt dual axis tracker is so-named because the panel array
is mounted on the tip of a long pole. Normally the east-west
movement is driven by rotating the array around the top of the
pole. On top of the rotating bearing is a T- or H-shaped
mechanism that provides vertical rotation of the panels and
provides the main mounting points for the array. The posts at
either end of the primary axis of rotation of a tip–tilt dual
axis tracker can be shared between trackers to lower installation
costs.
Field layouts with tip-tilt dual axis trackers are very flexible.
The simple geometry means that keeping the axes of rotation
parallel to one another is all that is required for appropriately
positioning the trackers with respect to one another. Normally
the trackers would have to be positioned at fairly low density in
order to avoid one tracker casting a shadow on others when the
sun is low in the sky. Tip-tilt trackers can make up for this by
tilting closer to horizontal to minimize up-sun shading and
therefore maximize the total power being collected.
The axes of rotation of tip-tilt dual axis trackers are typically
aligned either along a true north meridian or an east west line
of latitude. It is possible to align them in any cardinal
direction with advanced tracking algorithms.
| País: |
China |
| N º de Modelo: |
CGPT-DAT
|
| Precio FOB: |
( Negotiable ) (Negociable)
Obtener el precio más reciente
|
| Lugar de origen: |
China |
| Precio de pedido mínimo: |
- |
| Cantidad de pedido mínimo: |
1 Set |
| Detalle de embalaje: |
others |
| El tiempo de entrega: |
40 days |
| Capacidad de suministro: |
100 Set per Year |
| Tipo de pago: |
Western Union, T/T |
| Grupo de productos : |
solar solution
|
