TEVOUP HYDRA 305x305x400mm Build Volume Lattice Glass Platform Fast Heating Bed 2 in 1 Carving Machine 3D Printer Laser Engraver

Descripción del producto

TEVOUP HYDRA **5x**5x**0mm Build Volume Lattice Glass Platform Fast Heating Bed 2 in 1 Carving Machine 3D Printer Laser Engraver 
Advantages:
Excellent quality with CE/FCC Certification
Easy Operation & Assembly
Simple Maintenance
1 year Warranty

Features:

2 in 1 laser engraving cutting and printing function, special module design structure, can easily switch laser head and print head.

Using lattice glass hot bed, printing adhesion is more stable, easy to take mold; AC high power fast heating hot bed, can reach **0 degrees Celsius in 1 minute, and the temperature is constant.

**5x**5x**0mm larger build volume, able to print, cut and cave. And equip with direct extruder, free to print with soft filaments such as TPU, PLA, ABS, etc.

Adopts TMC***9 silent driver, the printing noise is as low as *0dBA, so there is no need to worry about affecting sleep even if you print at night. The motherboard uses MKS Robin Nano V3.0 which bring better performance.

Support auto-leveling function, more accurate measurement of the inclination of the hot bed plane, to achieve better printing results for beginners. And resume printing and filament run-out detection function. Faster speed, the max print speed is **0 mm/s. 


Specification:

Model: Hydra *-in*1 3D Printer

Product Size: *6 x *0 x *2cm/*2.*5 x *3.*2 x *4.*1in

Product Weight: *6kg/*5.*7lb

Build volume: **5 x **5 x **0 mm/*1.8 x *1.8x *5.*5 in

Layer resolution: 0.*5mm *0.*5mm

Build speed: *0mm/s - **0mm/s

Travel speed: **0mm/s

Print surface: Removable Glass-ceramic (magnetic PEI flex plate as upgrade)

Heat bed type: AC heat bed

Number of extruders: 1

Filament diameter: 1.*5mm

Supported materials: PLA, PLA FLEX, PLA WOOD, ABS, PETG, HIPS, ASA, PA, PC,  TPU

Special features: Modular X-Carriage, ABL, touchscreen, synced dual-z, direct drive, silent drivers

Advanced sensors: 3dtouch, filament detection sensor, sensorless homing

Calibration: Auto bed leveling

Print technology: FFF (Fused Filament Fabrication)

Feeder type: DIRECT DRIVE DUAL DRIVE extruder + V6 HOTEND

Max Z axis resolution: 0.*5mm

Nozzle type: V6 + MK8

Nozzle diameter: 0.4mm (spare nozzle: 0.4, 0.6, 0.8)

Nozzle temperature: **0°C - **0°C (More to come...)

Nozzle heat up time: <2 minutes

Build plate heat up time: **0℃ in less than 2 minutes

Operating sound: < *0dBA

Power: ******0V 

Control board: *2bit MKS Robin nano v3.0 /Germany Made TMC ***9 v2.0 UART MODE Marlin 2.0.9.1 / 3.5Inch touchsceen

Upgradability: In-house made X-carriage modular system: LASER head, open-source software, removable drivers,and more to come

Package Size: **3 x **0 x **0mm/*5.7 x *0.4 x *1in

Package Weight: *7kg/*7.*7lb