Styilong YL-5E Dial Type Temperature Regulator

Descripción del producto

YL*5 serise has got CE certificate. Item
Range of Measurement:K:****9(°c)
Accurancy of Measurement:0.5%
Size:*8mm x *8mm x **0mm
Error of Temperature Measurement:±1(°c)
Working Voltage:AC**0(V)

Specifica
YL*5ER:the controlling of output is relay contact **0V/DC(standard)

YL*5ES:the controlling of output is impulse voltage *2VDC(standard)

Features

1. To set and  modify the temperature values and paraments with dial switch,the operation is more intuitive,simple.

2.There are two lightly-touch keys on the panel,"MD" key on the left is the program menu key,while the "ENT" key on the right is the confirm key for setting or modifing paraments.

3.Standard sensor signal :K,others can be chosen:E and Pt**0,the range of measurement:****9°c.

4.Main outputs:"R"*-Relay controlling AC contactor

                         "S"*-Impulse zero triggering SSR

5.One output for over upper limit alarming,deviation alarm and absolute value alarm are free to select .

6.The deviation can be corrected,and the cold side of sense-transfering line can test the temperature alone.The amplifier of the cold side can return to zero by itself,the precision is ±0.5%FS.

Technical Parameters

1.The precision of setting:±0.5% FS±1 during the whole measuring range.

2.The precision of measuring:±0.5% FS±1.

3.The frequency of sampling:>2 times/sec.

4.The s(standard signals,free to combine) :K.

5.The ways of controlling temperature:Intelligent self-regulating function P,I,D(Time proportional control:modify I=0,D=0;or reach-stop control:modify P=0 is avaiable).

6.Output controlling:S"*-Impulse voltage *2VDC.

                                "R"*-Relay controlling AC contactor.

7.Relay contact loading:**0VAC/3A (resistance), **0VAC/1A (conductive,CosΦ=0.4).

8.Impulse voltage loading:*2VDC, max=*0mA(impulse SSR,with protection of short circuit).

9.Alarm funtion:alarm for temperature exeeding the absolute value and deviation of upper limit.

*0.Alarming output loadingL:relay contact **0VAC/3A (resistance), **0VAC/1A (conductive,CosΦ=0.4).

*1.The waste of voltage:*****0VAC,****0Hz,≤5W.

*2.Insulating resistance:≥*0MΩ(testing condition is **0VDC),(the main output is current or non-contacted

 voltage,the resitance of its  or output terminaller and CT terminaller don't need to be tested).

*3.The temperature and humidity of the working environment:

temperature:0~*0°c,humidity:****5% RH.