Product Description
Water Based Ink, 3D thick surface rubber paste

Product Feature
1.Fastness optimal, resistance to water.
2.It feels soft, not back to stick after dry.
3. The surface smooth, glossy,three-dimensional sense is strong.
4. Printing not plug performance.
5. This product belongs to environmental protection.

Product Specification/Models
MR***6B white rubber binder
MR***6T clear rubber binder

Other Information
. Thick edition production *****0 mesh net yarn (Japan yarn), 
uses *5 degrees (Angle) net yarn , 
it can make the point of view of the font is clear. According to the 
different pattern with different mesh screen to print .(The screen 
must be tightened up , this is key, then use thick film sensitive pulp 
sizing four to five layer, coating thickness up to about **1.5mm , 
after dry with ultraviolet lamp exposure *5 **0 minutes, then rinse it.
2. In order to guarantee the printing effect, it is need to print according 
to different BT - ***0 white mortar 5 to 8 times,each time general 
scraping for **4 times, natural drying 8 hours after drying, and then 
put it in tunnel (**0 °C, **0 °C) drying for 2 minutes.
3. In order to guarantee the print effects, if paste is too thick or too 
thin add water and thickening agent respectively. If you would like to 
make thickness to speed up and heightening can add the pearl powder 
(fine).
4. If you want to enhance the fastness, when using add 5% HS - **0 
nylon bridging agent or 2% CX - **0 imported catalyst.


1.The natural drying time and temperature related to the air humidity.
2.Storaged period: It can be storaged for more than one year in normal 
temperature, the warehouse should keep cool, dry and ventilated.
3.The inside bag should be solid after use, in case of exposed to the air 
causing crust.