sodium naphthalene sulphonate formaldehyde

Descripción del producto

Sodium naphthalene sulfonate formaldehyde CAS No.: *******4 Appearance: Brown powder Packing: Packed in plastic film bag wrapped with plastic woven sack with a net weight of *5kg each Storage: Kept in dry and ventilating place, prevent from rain and moisture when storage; if agglomerated, please crush and make it into solution, and its effect will be the same. Alternative name: sodium naphthalene formaldehyde, poly naphthalene sulfonate formaldehyde, snf, pns, FDN-c, naphthalene sulfonated formaldhyde, naphthalene formaldehyde, naphthalene sulfonate formaldehyde salt, sodium naphthalene sulfonate, Brief Introduction: It’s one of High Range Water-Reducing Admixture. Main Performance: Sodium Naphthalene Formaldehyde produces concrete with extremely workable characteristics referred to as high slump. PNS also allows concrete to be produced with very low water/cement ratios at low or normal slumps. Sodium Naphthalene Formaldehyde is ideal for use in prestress, precast, bridge deck or any concrete where it is desired to keep the water/cement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation Sodium Naphthalene Formaldehyde can be added directly or added in after melt. It can be added during mixing and after-mixing. The afterward approach can achieve better result. The suggested addition rate is 0.*5%. Sodium Naphthalene Formaldehyde Direction Prepare solutions as required. Direct use of powdery agent is allowed. Alternatively the addition of the agent is followed by water moisturization (water-cement ratio: *0%). The agent can be combined with other externally applied agents if pilot development or laboratory experiment succeeds. Sodium Naphthalene Formaldehyde Package, Storage & Handling For powder: Woven fabric bag with plastic liner. Net weight: *5kg +/- 0.1 kg.