Precio FOB
Obtener el precio más reciente( Negotiable )
|5 Unit Minimum Order
País:
China
N º de Modelo:
puzzle parking 7-15 layers
Precio FOB:
( Negotiable )Obtener el precio más reciente
Lugar de origen:
China
Precio de pedido mínimo:
-
Cantidad de pedido mínimo:
5 Unit
Detalle de embalaje:
container
El tiempo de entrega:
2-3 months
Capacidad de suministro:
10000 Unit per Year
Tipo de pago:
T/T, L/C
Grupo de productos :
China
Persona de contacto Mr. Daniel
BEIQIJIA, Beijing, Beijing
Sinoparking puzzle parking system is
semi-automatic parking equipment, also called Lift and Slide car
parking equipment or car lift, which is one kind of solution to add
car places on the basis of conventional
parking.
Technology
characteristics:
*Building block design, can achieve from
several spaces to more than ***0 spaces. It could be used
overground or underground even semi-underground, flexible design
with low cost.
*Take
full advantage of spaces, making parking spaces much more than
before.
*Serialization, standardization design,
reasonable structure, multi-protection devices,
reliable.
*Layout
flexibility, easy installation, many types could be combined to
build large scale parking lots.
*High
adaptability could be built overground or underground, Could meet
the parking requirements from 2 floors to 8 floors, and could be
used with single row or double rows.
*Driven
by motors with wire ropes or chains, smooth and
reliable.
*Operation mode: push , touchable screen,
card swiping optional.
*High
safety coefficient: Anti-fall devices, emergency stop , limit
switch, optoelectronic switch, height limit alarm and so
on.
*PSH
lift and slide car parking equipment parks and retrieves cars by
lifting or sliding pallets driven by motors connected by chain or
wire ropes, with impeccable safety devices and control system to
realize safety and high speed. Simple structure, standardization
design, large scale production, high speed installation, most
mature parking solution. Very suitable to be used in underground
parking lots, can meet the parking requirements from 2 layers to 8
layers to maximum parking spaces quantity.
Operating
principle
N(layer
quantity)*1 parking spaces left empty, controlled by PLC, the lower
layer equipment move horizontally, the upper layer equipment move
vertically to lower the upper layer cars to retrieve
cars.
æ¤å¤„æ’å…¥5ç§å‡é™æ¨ªç§»é“¾æŽ¥1
1. The main features
are as following:
1.1. Drivers park cars on the
pallets.
1.2. Motors drive chain or wire
rope carrying pallets lifting and sliding.
1.3. Layers except the top layer
should remain a vacancy space in one set for upper layers to lift
down.
1.4. The structures are simple to
install.
2. Main
components:
Sinoparking7 layer puzzle parking
systemis made of steel structure, pallet, transmission parts,
electrical parts, control box, operation box and so on.
2.1. Steel
structure
2.1.1. Adopt good rigidity H
profiled bar structure. There are slant rods between the beams and
columns to enhance stability. Surface treatment: Deoiling,
Phosphorization, Electrophoresis priming, Powder coating. Good
appearance and long life time. Color is optional for different
areas of parking equipment.
2.1.2. The equipment is
independent, not depending onwalls or columns. The structure is
simple and firm. All the parts can be installed completely without
cutting and welding while installation. No pollution
toenvironment.
2.2. Assembledpattern
pallet or galvanized wave pallet
2.2.1. Firm assembled structure,the
thickness is 2.5mm/2.0mm. Alsoit adopts pattern steelto avoid
slipping.
2.2.2. Surface: spray painted or
galvanized (selected by additional cost), smooth entrance, finished
edge and corner.
2.2.3. Every pallet has one or two
motors.
2.2.4. There are transmission shaft
on the side of pallet, so the pallet slides smoothlywithout
derailment.
2.3. Transmission parts
-Motors and chains
2.3.1. MCN motor from Taiwan, which
is specially designed forparking equipment.Lift motor is 3.7Kw and
2.2kw, slide motor is 0.2kw.
2.3.2. The motor has an automatic
brake function. When power off, the pallet will be
stopped.
2.3.3. Use strong chain and wire
rope,with safety protection.
2.3.4. Coefficient of safety of
chain is 7 times than car weight allowed.
2.4. Special guide
device.
Every car space has two guide pins
fixed at the carling.
It can prevent the pallet from
shaking when lift up the pallet.
2.5.Slide location
Slide location brake is made with
nylon. The switch is set under the pallet. This installation is
very safe and different from other manufacturers.
2.6. High strength
cable.
We adopt the high strength cable
which is durable and can be wringed.
2.7. Electric control
system
2.7.1. Everyset has one independent
control system.
Every set has one programmable
logic controller (PLC), Card reader, one control cabinet (IP*5),
one set of safety protection elements.
2.7.2. Safety control: electrical
security methods.
2.7.3. PLC: Mitsubishi
2.7.4. Relay: Schneider.
2.8. Operation
box
Operation box is installed on the
front pillar; both ID card and push are utilized.
3. Security
methods
3.1. Running warning: When the
system is running, there will bealarm with red lamp.
3.2. Emergency stop
switch
Every unit has an urgent stop
. When you meet urgent situation, push the stop , the
unit will stop immediately, also it will alarm by sound and light.
Before release the alarm, the system would not run.
3.3. Special block
device
The special block system prevents
the lifting pallet and sliding pallet from hit together.
3.4. Special baffle
device
There are baffles to prevent over
slide.
3.5. Liftlocation limit switchand
over-lift protectionswitch
There are limit switches and
over-lift protection switches beside transmission parts for lift
location. Once the firstswitch does not work, the over-lift switch
works, the system will stop, and alarm by sound and light. It can
ensure the safety of cars and the system.
3.6. Photoelectricity
sensors
The system will stop if someone
enters into equipment area while it is running, and alarm by sound
and light.
The system check by sensors and
will not start action if the car is over limitation of length or
height allowed.
3.7. Safetyhooks:
Adopt safety hook installation.
When chain is destroyed by accident, the hooks will hook the rings
to prevent pallet falling. At the same time the system will alarm
by sound and light.
3.8. Loop protection
The system has protectionswitches
for power malfunction, such as lack of phase, reverse-order, short
circuit, low voltage, and overload.
3.9. Power off
protection
There is mechanical brake for power
off by accident.
4. Technical
Parameter
SN | ITEM | SPECIFICATION | REMARKS |
1 | Equipment outer size | L***0*W***0*H****0mm | |
2 | Car size | L***0*W***0*H***0mm | |
3 | Car weight | ***0kg | |
4 | Lifting speed | **5m/min | |
5 | Sliding speed | **8m/min | |
6 | Power supply |
3PHASES5LINES AC**0V/*0HZ |
|
7 | Control mode | PLC | |
8 | Operation method | Push + ID card |
País: | China |
N º de Modelo: | puzzle parking 7-15 layers |
Precio FOB: | ( Negotiable ) Obtener el precio más reciente |
Lugar de origen: | China |
Precio de pedido mínimo: | - |
Cantidad de pedido mínimo: | 5 Unit |
Detalle de embalaje: | container |
El tiempo de entrega: | 2-3 months |
Capacidad de suministro: | 10000 Unit per Year |
Tipo de pago: | T/T, L/C |
Grupo de productos : | PSH |