Single Flame Source Tester

Descripción del producto

Product Description:
Single-flame source test, commonly known as the ignitability test.Test equipment complies with standard EN ISO ******2. Building structure test findings can be categorised using standard ******1.
The test specimens' measurements must be (**0) mm length by (*0) mm broad.The burner is moved horizontally at a *5° angle until the flame, which has a *0 mm length, touches the test specimen at the predetermined position. Testing may be required for edge exposure, surface exposure, or both. As determined by the sponsor, the flame application time is either *5 or *0 seconds.
The following information is noted during the test: whether ignition happens; whether or not, and when, the flame tip rises **0 mm above the flame application point; whether the filter ignites
Standards:   EN ISO ******2, DIN ***2
Technical parameters:

• This apparatus made up of two parts      burning chamber and control device
• Power supply    AC**0V±*0%,*0Hz
• Burner  diameter 0.*7mm burner with regulator; four ï¿ 4mm air suction inlet
• Gas source          >*5% propane gas;(user should provide for themselves)