Silicon Rubber RTV for mould making Rubber series

Descripción del producto

Silicon Rubber RTV for mould making Rubber Specifications:

Model:**5#

Appearance:white/red

Viscosity(cs):**********0

Hardness(A):****7

Tensile strength(kgf/cm)≥****6

Elongation break(%):≥**0

Retractility(%):≤0.3

Curing agent mixed rate(%):**3

Operate time(min):*0

Curing time(hours):**4

Mixing proportion of curing agent:2%

Operation of Silicon Rubber RTV for mould making Rubber

1. deal with original moulds

2. brush on release agent

3. correct weigh accoring to mixng ratio

4. stir the two component evenly

5. vacuum-pumping

6. pouring

 Features of Silicon Rubber RTV for mould making Rubber:

(1) Silicon rubber for pad printing with SGS and ROSH approval

(2) Curing agent arrange together as free charged

(3) In liquid form and in various colors

(4) With an exceptional fluidity and good operability.

(5)Temperature and deformation resistance as well as low shrinkage.

(6) High duplication times.

(7) Sample orders are available

(8) MOQ: **0KG

Frequently asked questions of Silicon Rubber RTV for mould making Rubber

1. Why should the silicone mold be reused only for a few times?
It can be due to the following reasons:
a. Adding too much silicone oil in to silicon rubber. Silicon oil is an additive which destroies the molecular weight of silicone rubber and reduce the tension and tear strength.
b. Using the silicon rubber with a high hardness to make molds for small sized products with delicate and intricate designs and the silicon rubber with a low hardness to makes molds for large sized products with simple designs.
(Notes: we should choose the silicon rubber specifically according to the requirements of our products to avoid this problem.)

 

We will produce silicon follow your request, please feel free to contact Miss Helen

*****************9

***************8