Descripción del producto

Type SG or SHG gravel pumps are designed for continuously handling the most difficult higher abrasive slurries which contain too big soids to be pumped by a common pump. They are suitable for delivering slurries in Mining, Explosive sludge in metal melting, Dredging in dredger and course of rivers, and other fields. Type SHG pumps are of high-head ones. Construction of this pump is of single casing connected by means of clamp bands and wide wet-passage. The wet -parts are made of Ni-hard and high chromium abrasion-resistance alloys. The discharge direction of pump can be oriented in any direction of **0 degree. This type of pump possesses the advantages of easy installation and operation, good performance of NPSH and abrasion resistance.

Specification:
D:******0mm
Q:******0m3/h
H:***0m

Function Introduction:
1. Type SG(SHG)pump is of horizontal cantilevered single-casing centrifugal pump.
2. Construction of this pump is of single casing connected by means of clamp bands and the discharge direction of pump can be oriented in any direction of **0. the type of pump possesses the advantages of easy installation.
3. the cylinder �Ctype bearing assembly with oil lubrication is adopted by the pump. It is suit for adjusting the distance between impeller and pump. The bearing assembly using oil lubrication.
4. third kinds of shaft seal**-mechanical seal, expeller seal and packing seal
5. wide passage, good performance of NPSH, High efficiency, good performance of anti-wearing and anti-corrosion.
6. the type of driver just have v belt driver, gearbox driver, elastic coupling driver, fluid couplings driver, frequency conversion driver, silicon controlled rectifier speed regulation etc.